Abstract:An experimental study is performed on the microstructure transformation induced by rapid laser welding in the different regions of Zr61.4Cu27.8Al4Ni6Y0.8 bulk metallic glass (BMG). The laser input energy has a remarkable influence on the microstructure and microhardness of the Zr-based BMGs. The microstructures in different regions of as-welded joints are diverse. Crystallization happens in heat-affected zone (HAZ) with crystalline dendritic phase of CuZr, which results in the deterioration of the microhardness to 434.9 ± 17.1 HV in HAZ, much lower than that of parent material as 517 ± 5.0 HV. Meanwhile, the element profiles indicate that intragranular segregation of Cu element occurs during the crystallization process. In the center of molten zone (MZ), the structure is fully amorphous and its hardness is close to that of parent material. In the region transiting from MZ to HAZ, some nano-grains with an average size of 20–50 nm are identified. In addition, several flower-like nanostructured grains of Y2O3 phase with a size ranging from 50 to 80 nm are formed in MZ’s matrix. The nanocrystallization is believed to be responsible for the enhancement of the Vickers hardness up to 560.1 ± 8.4 HV in this region.Graphic AbstractRapid laser processing induces three kinds of microstructures in Zr61.4Cu27.8Al4Ni6Y0.8 bulk metallic glasses, i.e., the severe crystallization of CuZr phase in heat affected zones (HAZ), the nano-grains in the region transiting from molten zone (MZ) to HAZ, and the fully amorphous structure in the center of MZ, which consequently results in the diverse microhardness in spatial distribution.

Induced multiple heterogeneities and related plastic improvement by laser surface treatment in CuZr-based bulk metallic glass

In Vitro Cytocompatibility of a Zr-based Metallic Glass Modified by Laser Surface Texturing for Potential Implant Applications

Enhanced mechanical properties of Zr65Cu15Ni10Al10 bulk metallic glass by simultaneously introducing surface grooves and multiple shear bands

Deformation-induced microstructural heterogeneity and rejuvenation in a Zr-based bulk metallic glass

Laser additive manufacturing of Zr-based bulk metallic glass composite improved by TRIP effect

Improve plasticity of Zr-based metallic glass by surface treatment

Plasticity-improved Zr–Cu–Al Bulk Metallic Glass Matrix Composites Containing Martensite Phase

Influence of Mo micro-particles on crack formation, microstructure, and mechanical behaviour of laser powder bed fusion fabricated CuZrAl bulk metallic glass composites

Effect of laser-shock peening on the structure and nano-mechanical behavior of a Ti-based metallic glass

Investigations in the fabrication of surface patterns for wettability modification on a Zr-based bulk metallic glass by nanosecond laser surface texturing

Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites

New Class of Plastic Bulk Metallic Glass.

Optimizing mechanical and electrical properties of Cu-coated Cu–Zr–Al bulk metallic glass composites by adjusting glassy powder size

Enhancement of plasticity and toughness of 3D printed binary Zr50Cu50 bulk metallic glass composite by deformation-induced martensitic transformation

Microstructure Transformation in Different Regions of Zr61.4Cu27.8Al4Ni6Y0.8 Bulk Metallic Glass Induced by Rapid Laser Welding

Modulation and Control of Wettability and Hardness of Zr-Based Metallic Glass via Facile Laser Surface Texturing

Incorporation of ultrafine nanograins in Zr–Cu–Al–Ni–Co bulk metallic glass enabling significantly improved mechanical properties

Improving plasticity of the Zr46Cu46Al8 bulk metallic glass via thermal rejuvenation

Fabrication of Zr-based bulk metallic glass lattice structure with high specific strength by laser powder bed fusion

A Plastic Zr–Cu–Ag–Al Bulk Metallic Glass

Microstructure and mechanical properties of Zr46Cu46Al8 bulk metallic glass after annealing treatment