Abstract:Based on the recently constructed n-body potential, both molecular dynamics and Monte Carlo simulations revealed that the Al-Zr amorphous alloy or metallic glass can be obtained within the composition range of 24–66 at. % Zr. The revealed composition range could be considered the intrinsic glass-forming range and it quantitatively indicates the glass-forming ability of the Al-Zr system. The underlying physics of the finding is that, within the composition range, the amorphous alloys are energetically favored to form. In addition, it is proposed that the energy difference between a solid solution and the amorphous phase could serve as the driving force of the crystalline to amorphous transition and the driving force should be sufficiently large for amorphization to take place. The minimum driving forces for fcc Al-based and hcp Zr-based Al-Zr solid solutions to amorphize are calculated to be about −0.05 and −0.03 eV/atom, respectively, whereas the maximum driving force is found to be −0.23 eV/atom at the alloy stoichiometry of Al60Zr40. A thermodynamics parameter γ¯, defined as the ratio of the driving force to the formation energy of the solid solution, is further proposed to indicate the glass-forming ability of an Al-Zr alloy. Thermodynamics calculations show that the glass-forming ability of the Al56Zr44 alloy is the largest, implying that the Al56Zr44 amorphous alloy is more ready to form than other alloys in the Al-Zr system. Besides, Voronoi analysis found that there exists a strong correlation between the coordinate number and structure. Amorphization could result in increase of coordinate numbers and about 1.5% volume-expansion. The volume-expansion induced by amorphization can be attributed to two factors, i.e., the total bond number of the Al-Zr amorphous phase is greater than that of the corresponding solid solution, and the averaged bond length of the Al-Zr amorphous phase is longer than that of the corresponding solid solution. For the Al-Zr alloys, especially for the Al-Zr amorphous phase, there exists a negative chemical micro-inhomogeneity in the alloys, suggesting that metallic bonds prefer to be formed between the atoms of dissimilar species. Finally, it is found that there is a weak correspondence between the bond-angle distributions of Al-Zr amorphous alloys and the solid solutions. It is further suggested that the configuration of Al-Zr amorphous alloys embodies some hybrid imprint of bcc, fcc, and hcp structures. More interestingly, the short-range order is also observed in the bond-angle distributions.

Formation and structure of Cu-Zr-Al ternary metallic glasses investigated by ion beam mixing and calculation

On the atomic structure of Zr–Ni and Zr–Ni–Al metallic glasses

Composition reign favored for the formation of CuZrAl amorphous phases investigated by ion beam mixing

The characterisation of atomic structure and glass-forming ability of the Zr–Cu–Co metallic glasses studied by molecular dynamics simulations

Metastable phase formation and transformation studied by ion mixing and computation for the Cu–Zr–Ni system

Formation and structure of Al-Zr metallic glasses studied by Monte Carlo simulations

Thermodynamic Calculation And Interatomic Potential To Predict The Favored Composition Region For The Cu-Zr-Al Metallic Glass Formation

Glass Forming Abilities of Binary Cu100−xZrx (34, 35.5, and 38.2 At. %) Metallic Glasses: A LAMMPS Study

Formation of the Ni–Zr–Al Ternary Metallic Glasses Investigated by Interatomic Potential Through Molecular Dynamic Simulation

Glass-Forming Ability And Atomic-Level Structure Of The Ternary Ag-Ni-Zr Metallic Glasses Studied By Molecular Dynamics Simulations

Atomic Structure and Glass Forming Ability of Cu46zr46al8 Bulk Metallic Glass

Design Of Cu8zr5-Based Bulk Metallic Glasses

Formation and Structure of Pd-Zr Metallic Glasses Studied by Molecular Dynamics Simulations

Formation Of Amorphous Alloys By Ion Mixing And Its Thermodynamic And Atomistic Modeling In The Binary Metal Systems

Ion Beam Mixing to Study the Metallic Glass Formation of the Cu–Zr System

Theoretical study on the composition location of the best glass formers in Cu-Zr amorphous alloys

Glass-formation and atomic structures of Cux(Zr 0.22Hf0.78)1-x and (Cu0.61Hf 0.39)1-xZrx alloys investigated by Monte Carlo simulation

Composition design and mechanical properties of ternary Cu–Zr–Ti bulk metallic glasses

Prediction of Glass-Forming Ability and Atomic-Level Structure of the Al-Zr-Pd Metallic Glasses by Molecular Dynamics Simulations

Microstructure and crystallization in Cu50Zr45Al5 metallic glass

Structure of the amorphous, massive-metallic-glass forming Ni 25 Zr 60 Al 15 alloy from molecular dynamics simulations