Abstract:The paper introduces a new automatic drilling and riveting system for aircraft assembly which is composed of two five-axis machine tools in coordination. As a dual-machine system, relative position and orientation accuracy of coordinated machines is the decisive factor for high fastening quality. Considering all static/quasi-static error sources deteriorating relative positioning accuracy, an effective error compensation method which consists of a new error prediction model and an error compensation strategy is proposed for coordinated five-axis machines. Based on the decomposition concept, the coordinated workspace of dual machines is described as the superposition of the coordinated workspace of prismatic joints (CWP) and the coordinated workspace of revolute joints (CWR). They are separated to study the influence on the objective error, and a combined interpolation algorithm based on the shape functions is proposed for error prediction, which can avoid the curse of dimensionality essentially and be efficient to predict the relative position and orientation errors at any desired pose in the coordinated workspace of dual machines. For the error compensation of dual-machine system, a basic strategy is proposed which is to take the position and orientation of the driving machine as the reference and compensate the predicted error for the driven machine through the motion commands modification. To verify the feasibility of proposed method, experiments have been performed on the developed dual-machine system with different error compensation methods. The results show that the proposed method is more efficient which needs less time for sampled data measurement and calculation, and the relative positioning accuracy of the compensated dual-machine system is improved to 0.072 mm and 0.017 degrees which meet the requirements for automatic drilling and riveting in aircraft assembly.

Ab errors of dual-drive system in gantry-type machine tools

Research on Compensation of Dynamic Non-synchronous Errors of Dual-drive System in Gantry-type Machine Tools

A Combined Nonlinear Pid Control and Cross-Coupled Pre-Compensation Control in Hydraulic Excavator

Non-synchronous Error and Modeling of Dual-drive System in Gantry-type Machine Tools with Travelling Bridge

Error Analysis and Compensation Method for Motion Errors of NC Machine Tools under Cutting Loads

Synchronous Control System Modeling of Gantry-Type Machine Tools

An Efficient Error Compensation Method for Coordinated CNC Five-Axis Machine Tools

Advanced Synchronization Control of a Dual-Linear-Motor-Driven Gantry with Rotational Dynamics.

Dual Drive System Modeling And Analysis For Synchronous Control Of An H-Type Gantry

Research on New Software Compensation Method of Static and Quasi-Static Errors for Precision Motion Controller

Master-Slave Synchronous Control of Dual-Drive Gantry Stage With Cogging Force Compensation

Adaptive Synchronization Tracking Control of Dual-Driving Feed System for Gantry-Type Machine Tool

Thermal Deformation Errors Compensation System of Machine Tools

Integrated Coordinated/Synchronized Contouring Control of a Dual-Linear-Motor-Driven Gantry

Research on the Error Measurement and Error Compensation Technology for CNC Machine Tools

A Novel Geometric Error Compensation Method for Gantry-Moving CNC Machine Regarding Dominant Errors

A Real Time Error Compensation Method for CNC Machine Tools Based on Redevelopment of Human-Machine-Interface

Adaptive robust synchronous control with dynamic thrust allocation of dual drive gantry stage

Computer-aided accuracy enhancement for multi-axis CNC machine tool

Dual-drive synchronous control with large payload based on cross-coupled algorithm

H∞ Cross-Coupled Algorithm-Based Robust Synchronous Control in Large Dual-Drive Gantry Stages