Abstract:Icing widely exists in production and life and always causes great harm. In this study, icing processes of sessile supercooled water droplets on cold spheres are explored. A theoretical model is established and validated by comparing the droplet profiles and freezing times under different parameters with the experimental results. The icing characteristics such as base area, freezing rate and time, and the profile and height of frozen droplets at different surface temperatures, droplet volumes, contact angles, and sphere diameters are obtained. The results demonstrate that the base area and droplet profile are not significantly affected by the surface temperature, yet a higher surface temperature causes a longer freezing time. The increase in droplet volume enlarges the base area and enhances the solid-liquid heat transfer, which results in an increase in freezing time and droplet height. As the contact angle becomes greater, the base area decreases, resulting in prolonged freezing time. For a smaller sphere diameter, the droplet height exhibits an initial decrease followed by an increase; for a larger sphere diameter, the droplet height monotonically increases. Under larger droplet volumes and smaller contact angles, the effect of sphere diameter on the base area and droplet height is more significant, yielding maximum changes of 30.1 % and 22.6 % compared to the values for the planar surface. Likewise, under smaller droplet volumes and higher surface temperatures, the sphere diameter has a more noticeable impact on the freezing time, with an increase of 10.2 %. The tip angle of the frozen droplet is independent of the sphere diameter. The above findings improve the understanding of the icing characteristics of the sessile supercooled water droplets on curved surfaces, and reveal the influence of the sphere size on the icing characteristics, thus providing new ideas for the design of curved anti-/de-icing surfaces.

An Ice Accretion Model for Aircraft Icing Based on Supercooled Icing: Theory and Application

Development and Theoretical Analysis of an Aircraft Supercooled Icing Model

A Spongy Icing Model for Aircraft Icing

A Theory on the Icing Evolution of Supercooled Water Near Solid Substrate

Numerical Simulation of Ice Crystal Supercooled Droplet Mixed Phase Icing Based on the Improved Messinger Model

A New Ice Accretion Model for Aircraft Icing Based on Phase-Field Method

Application of Simplified Thermal Model on Ice Accretion

A Three-Dimensional Aircraft Ice Accretion Model Based on the Numerical Solution of the Unsteady Stefan Problem

Aircraft Icing Model Considering Both Rime Ice Property Variability and Runback Water Effect

Model for Aircraft Icing with Consideration of Property-Variable Rime Ice

Numerical Simulation of Aircraft Icing with an Unsteady Thermodynamic Model considering the Development of Water Film and Ice Layer

General Situation of Calculation Method of Ice Accretion on Airfoil

Numerical Investigation of Ice Accretion Effects at Supercooled Large Droplet Conditions

Modelling of the icing processes of sessile supercooled water droplets on cold spheres

Calculation of the heat transfer and temperature on the aircraft anti-icing surface

Influence of Air Flow Field Computation on an Ice Accretion Simulation of Airfoils

Study of Solidification and Microstructure Characteristics for Aircraft Icing

Aerodynamic prediction and roughness implementation toward ice accretion simulation

Multistep Simulation for Three-dimensinal Ice Accretion on an Aircraft Wing

Influence of Ice Growth Mode on the Ice Thickness and Shape Prediction of Two-Dimensional Airfoil

Numerical Investigation on Impingement Dynamics and Freezing Performance of Micrometer-Sized Water Droplet on Dry Flat Surface in Supercooled Environment