Abstract:Abstract In the pursuit of cost reduction and enhanced construction efficiency in the mechanical connection of reinforcing bars within precast assembled concrete structures, a novel-reinforcing bar connection joint is introduced. This innovative solution entails the utilization of 40Cr alloy steel tubing and the implementation of a hot forging high-precision rolling process to fabricate a series of new rebar joint specimens. Through unidirectional tensile testing, the failure modes of the specimens and the variations in load–displacement curves were meticulously analyzed. The investigation delved into the intricacies of the joint connection mechanism, scrutinizing the influence of three pivotal structural design parameters—namely the embedded length of the rebar, the sleeve thickness, and the clamp thickness—on the ultimate bearing capacity of the joint. The findings indicate that an embedded rebar length ranging from 1.5 to 1.75 times the nominal rebar diameter ensures a tensile strength ratio of the joint to the standard rebar tensile strength not less than 1.1. Notably, the sleeve thickness emerged as a significant factor impacting connection performance, while the clamp thickness exhibited negligible effects on specimen performance. Furthermore, an augmented internal thread angle was found to enhance shear resistance. The optimal design parameters encompass an outer sleeve diameter of 78 mm, a large end clamp diameter of 65 mm, and an internal thread angle of 60°. The proposed single taper sleeve locking-type joint, characterized by a rational structural design, aligns with the stipulations of Grade I joints outlined in the industry standard JG/J 107–2016. This novel joint design is well-suited for the mechanical connection of large-diameter rebars, offering a promising avenue for advancing construction practices in precast assembled concrete structures.

Test on Hybrid Connection for Steel Bars in Concrete

Analysis on Mechanical Behavior of Welding-Overlap Splices for Mid-Diameter Steel Bars

Experimental Investigation on Influence of Embedment Length, Bar Diameter and Concrete Cover on Bond Between Reinforced Bars and Steel Fiber Reinforced Concrete (SFRC)

Study of Bond Behavior between Concrete and Steel Bars Based on New Beam Specimens

Bolted End Plate Connections for Steel Reinforced Concrete Composite Structures

Macrocell Corrosion Behavior of Steel Bar with Different Connection

Experimental Investigation and Design of Concrete-Filled Steel Tubular CHS Connections

Test study on the bond stress-slip relationship between concrete and steel bars

EXPERIMENTAL STUDY ON PULLOUT BEHAVIOR OF LAP SPLICE CONNECTIONS BETWEEN DOUBLE-STEEL-PLATE COMPOSITE WALLS AND RC RAFT FOUNDATION IN NUCLEAR ENGINEERING

Tensile Behaviour of Transverse Reinforcement with Different Connection Methods in Single Steel-Plate Concrete Composite Structures

Development and Testing of Precast Concrete Beam-to-column Connections with High-Strength Hooked Bars under Cyclic Loading

Experimental investigations of bond behavior of double-row spliced rebars in Ultra-High Performance Concrete (UHPC)

A Study on the Mechanical Behavior of Precast Concrete Shear Wall Structure with Hybrid Connection of Section Steel

Experimental test on precast concrete reinforcement connector technology based on strong lapping concept

Bond Behaviour of Stainless-Clad Bimetallic Rebar in Concrete

Experimental Study on Steel Jacket–Concrete Composite Connections

Experimental and numerical study of steel-to-concrete joint section in hybrid cable-stayed bridges

Connections between precast hollow concrete columns and foundations using UHPC and rebar lap splices

Pullout Behavior of Rebar Lap Splices in Steel-Concrete Composite Structures

Experimental study on the connection performance of single taper sleeve locking-type joint

Connection of the prefabricated updeck of road tunnels by a short lap-spliced joint using ultra-high-performance fiber-reinforced concrete