Abstract:This study experimentally investigated the heating process of an axially induced cold gas stream in a swirl tubular flame established through tangential fuel/air pre-mixture injection, aiming to clarify the effects of swirl motion on the heat and mass transfer enhancement. Tubular flame burners with geometry swirl numbers (S) of 0.35 to 1.4 were employed in addition to a conventional slit-type burner to systematically study the flame structure, stability, temperature distribution and flow field. The results show that in comparison to the slit burner without rotation, the swirl tubular flame burner provides a much wider range of stable flame from lean to rich limits even under large flow rates. The heating rate of the inner cold stream by the outer burned gas stream increases as the swirl number raises. Cold flow visualization illustrates that the interface between the two streams is rolled up and instability appears at the interface for the larger swirl numbers of S = 0.7 and 1.4, resulting in enhancement of mixing rate. At large flow rates the two streams are well mixed under cold flow condition, however, they are separated and ordered under combustion condition in the upstream, probably resulted from the burned gas expansion outside the central gas stream. While their mixing rapidly enhances as S raises to beyond 0.7. A simple theoretical analysis illustrates that the enhancement of the heating rate with a rotational motion can be quantitatively evaluated by replacing the numeric unity in Eq. (1) with the value of S + 1. The enhancement seems to be through an increase of heat transfer area at low rotational velocities, or increases of heat and mass transfer rates at high rotational velocities.

Numerical Simulation of the Swirl Flow Effect on the Cold Condition Characteristic of Entrained Flow Gasifier

Numerical Simulation for Effects of Venturi Tube on Swirling Flow Field

Numerical Simulation and Experimental Investigation of Flow Field in Gas-Liquid Cylindrical Separator with Baffle Configuration

Numerical Simulation of GSP Gasifier under Different Swirl Angles

Numerical Simulation of Swirling Burner in Cold State

Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor

Numerical Simulation and Flame Characteristics Analysis of Non-Premixed Swirling Combustion

Numerical Simulation of Effects of Venturi Tube Throat Diameter on Flow Field of Combustor

Numerical Simulation for Pulverized Coal Gasifier's Fluid Flow Characteristic on Cold and Hot Condition

Experimental study on cold two-phase flow in swirl burner exit

Numerical Simulation of the Gas Flow Field from a Triple Channel Coal-Water Slurry Gasifier Nozzle

Effects of Swirl on the Heating Process of a Central Gas Stream in a Tubular Flame

Numerical investigation of inlet guiding ring effect on combustor flow field with multiple swirler structures

Numerical Simulation of Gas-Particle Flows with Different Swirl Numbers in a Swirl Burner

Numerical Simulation of Internal Flow Fields of Swirl Coaxial Injector in a Hot Environment.

Three-dimensional Numerical Simulation of Entrained-Flow Gasifier and Influence of Coal Distribution at the Inlet

Numerical Simulation on the Flow Pattern of a Gas-Liquid Two-Phase Swirl Flow

Experimental study on combustion flow field characteristics of swirl combustor

Numerical simulation of gasification characteristics in a circulating fluidized bed biomass gasifiers

Three-Dimensional Simulation for an Entrained Flow Coal Slurry Gasifier

Numerical Investigation on Mechanism of Swirling Flow of the Prefilming Air-Blast Fuel Injector