Abstract:Icing is a serious threat to the flight safety of aircraft. Lightweight and efficient electrothermal de-icing systems for carbon fiber reinforced polymer components are expected to contribute to the lightweighting and electrification of aircraft. This study presents the development and test of a novel, integrated, multifunctional composite electrothermal ice protection system. The system achieves this by incorporating a carbon-based ultra-thin flexible heating film into a carbon fiber-reinforced polymer composite laminate. T700 and M40 carbon fiber prepregs were used. The system composition and configuration were designed based on the anisotropic mechanical and thermal properties of the carbon fiber-reinforced polymer composite. The effects of ply stacking sequence, presence of insulation layer, ply angle, heating area, and prepreg type on thermal response and de-icing performance were investigated. Thermal response experiments were carried out in both room temperature and low temperature environments. A one-dimensional thermal response analysis model was developed for a representative heating structure. Comparative de-icing experiments were conducted on different samples in a low-temperature test chamber. A numerical model, based on the modified enthalpy-porosity method, was developed to simulate the de-icing process, and showed good agreement with the experimental results. Experiments and numerical calculations show that the arrangement of the heater close to the deicing surface improves the performance of the electrothermal deicing system while maintaining the overall mechanical properties of the multi-layer structure. While the insulation layer helps marginally with heat loss during de-icing, it significantly increases the system’s thermal inertia, which delays the de-icing’s start. It is recommended to minimize or eliminate insulation layer thickness. Rapid de-icing effects, combined with energy conservation, can be achieved through a short-term, high-power heating strategy.

Deicing Investigation of a CNFP-based High-Efficiency Self-Deicing System

Self-deicing Road System with a CNFP High-Efficiency Thermal Source and MWCNT/cement-based High-Thermal Conductive Composites

Analytic investigations of CNFP-based self-deicing road system on the deicing performance

Induction Heating Characteristics of Electroless Ni-Coated CFRP for Deicing and Anti-Icing

Experimental Investigation of Road Snow-Melting Based on CNFP Self-Heating Concrete

Self-heating fiber reinforced polymer composite using meso/macropore carbon nanotube paper and its application in deicing

A Feasibility Study of Self-Heating Concrete Utilizing Carbon Nanofiber Heating Elements

Integrated Composite Electrothermal De-Icing System Based on Ultra-Thin Flexible Heating Film

Synergistic effect of hybrid fillers on electro-thermal behavior of nanocomposite for active de-icing application

Effect of Atmospheric Temperature on Epoxy Coating Reinforced with Carbon Nanotubes for De-Icing on Road Systems

Self-heating 3D Printed Continuous Carbon Fiber/epoxy Mesh and Its Application in Wind Turbine Deicing

Improvement in electrical characteristics by surface modification of multi-wall carbon nanotube based buckypaper for de-icing application

Molecular design and preparation of an integrated CNT@EVA/PVDF composite film heater for effective deicing applications

Passive Anti-Icing and Active Electrothermal Deicing System Based on an Ultraflexible Carbon Nanowire (CNW)/PDMS Biomimetic Nanocomposite with a Superhydrophobic Microcolumn Surface

CFRP Surface Ply-Centric Electrified Spatiotemporal Self-Heating for Anti-icing/De-icing

Present a new type of self-heating composite based on carbon nanotubes paper and investigate the feasibility in deicing (presentation video)

CNTs-induced superhydrophobic and photothermal coating with long-term durability and self-replenishing property for anti-icing/de-icing

Durability and Electrical Conductivity of Carbon Fiber Cloth/Ethylene Propylene Diene Monomer Rubber Composite for Active Deicing and Snow Melting

Discrete element analysis of heating transfer characteristics of airport pavements by using electro thermal method for snow melting and deicing

Functionalized superhydrophobic MWCNT/PEI nanocomposite film with anti-icing and photo-/electrothermal deicing properties

Development Of Self-Heating Concrete Utilizing Carbon Nanofiber Heating Elements