Abstract:Currently, fatigue-resistance topology optimization has received ever increasing attention, in which most of the literature considers this issue as a simple extension of stress-based topology optimization. However, previous approaches may not be applicable when considering general loads, as the conventional uniaxial rainflow counting method, commonly employed in prior studies, can result in significant errors. Furthermore, the inclusion of general loads introduces additional nonlinearity to fatigue-resistant topology optimization, posing challenges in identifying the optimal solution. To this end, a novel methodology for fatigue-resistance topology optimization considering general loads is proposed in this paper. The independent rainflow counting method is utilized during the process of structural damage estimation. The damage penalization model is subsequently adopted to reduce the nonlinearity by scaling the value of fatigue damage. To illustrate the necessity of an independent rainflow counting method, an example of a double L -shaped structure subjected to general loads is presented. The augmented Lagrangian (AL) approach is introduced to transform numerous damage constraint equations into the objective function, generating a sequence of box-constrained optimization sub-problems. After employing the typical SIMP technique, the relative sensitivities of the AL function regarding design variables are derived, which facilitates the efficient solution using the method of moving asymptotes (MMA). Through 2D and 3D numerical tests, the effectiveness of the proposed method is validated in comparison to the traditional method. Further investigation is conducted into the influences of general loads, damage penalization model, and manufacturing error robustness. In addition, the fatigue-resistance performance of a bearing support of a wind turbine is improved by the suggested approach, and its overall weight is decreased by 25.40%. The proposed method addresses the nonlinear and localized nature of fatigue-resistant topology optimization more efficiently. The results indicate that the proposed method can develop a lightweight design for structures under general loads.

Fatigue Reliability Based Design Optimization of Bending Stiffener

Design Approach of Stiffeners in Extended End Plate Connections and Finite Element Analysis

Reliability-based Design Optimization for Stiffened Panel of Deep-Water Platform

Fatigue Reliability Analyses on Key Parts of Tension Leg Platform

Optimization of Main Engine Foundation Based on Fatigue Strength

Fatigue-resistance topology optimization of continuum structure by penalizing the cumulative fatigue damage

Fatigue evaluation and structural optimization of rib-to-diaphragm connection in orthotropic steel decks

An Approach to Estimate the Low Cycle Fatigue Probabilistic Curves of PBF-LB/M 316L Steel from Small Size Datasets Using the Remora Optimization Algorithm

A fatigue-resistance topology optimization formulation for continua subject to general loads using rainflow counting

Dynamic Analysis of Unbonded Flexible Pipe with Bend Stiffener Constraint and Bending Hysteretic Behavior

Fatigue analysis of water intake risers: Hydrodynamic damping effect and a hybrid frequency-time domain method

An Out-of-Plane Bending Fatigue Assessment Approach for Offshore Mooring Chains Considering the Real-Time Updating of Interlink Bending Stiffness

Flexible Riser Tensile Armour Stress Assessment in the Bend Stiffener Region

Fatigue failure and optimization of double-sided weld in orthotropic steel bridge decks

Analysis for Stress Characteristics and Structural Parameters Optimization in Orthotropic Steel Box Girders based on Fatigue Performance

Fatigue Property and Improvement of a Rounded Welding Region between the Diaphragm Plate and Closed Rib of an Orthotropic Steel Bridge Deck

A systematic topology optimization approach for optimal stiffener design

Stiffener layout optimization framework by isogeometric analysis-based stiffness spreading method

Fatigue-constrained topology optimization method for orthotropic materials based on an expanded Tsai-Hill criterion

Flexible Riser Top Connection Analysis With I-Tube Interface And Bending Hysteresis Effect

Optimal topologies considering fatigue with reliability constraint