Abstract:Numerous attempts have been made to develop ion-exchange membranes with low resistance for various applications such as electrodialysig and fuel cells. In this study, the strategies of immersion precipitation and dry-casting were combined, to control the membrane porosity with the purpose of improving the physical and electrochemical properties of ion-exchange membranes. The porosity was tuned using the time of membrane exposure to an elevated temperature environment. In addition to controlling the porosity to balance the membrane electrical resistance with the diffusion caused by the concentration gradient, it was experimentally shown that the porosity can influence the IEC and water uptake of the membrane and, thus, further affect the resistance. Furthermore, the surface hydrophilicity was characterized by water contact angle measurements; the results revealed that the porous membranes were more hydrophilic than the dense membranes. As demonstrated by experimental data for desalination by electrodialysis, it was found that a membrane dried at 60 degrees C for 1 h had the highest desalination efficiency. This is mainly because porous membranes facilitate the transport of ions. Compared to membranes with higher porosity, the membrane prepared with a 1-h aging time had more steric hindrance, which can decrease the diffusion of ions, so that a superior desalination efficiency can be obtained. To further investigate the impact of the density of -SO32- functional groups on the electrodialysis process, membranes with various weight ratios of poly(ether sulfone) (PES) to sulfonated poly(ether sulfone) (SPES) were prepared. With increasing content of SPES, the physical and electrochemical properties of the newly developed porous membranes were changed. A membrane with higher density of functional groups was found to have a higher desalination efficiency, because of the electrostatic effect of the membrane. These results were consistent with the current efficiency. Under optimal membrane preparation conditions, the obtained membrane had a high IEC (1.75 mmol/g) and water uptake (168%). The desalination efficiency reached 95%, and the current efficiency reached 100%. It was concluded that the performance of a porous membrane with controllable porosity can enhance the electrodialysis (ED) process with respect to energy efficiency and desalination efficiency. New methods of fabricating membranes with pores such as immersion precipitation and dry-casting are thought to be potential routes to decreasing the electrical resistance.

Effect of some parameters on the performance of eletrodialysis using new type of PVDF-SiO 2 ion-exchange membranes with single salt solution

Desalination performance of SiO_2/PVDF ion-exchange membrane in single component electrolyte treatment

Desalination of Water with a High Degree of Mineralization Using SiO2/PVDF Membranes

A novel UV-crosslinked sulphonated polysulfone cation exchange membrane with improved dimensional stability for electrodialysis

Cation-Exchange Membranes with Controlled Porosity in Electrodialysis Application

Transport Properties of PVDF-SiO2 Anion Exchange Membrane

Ion Transport Properties of a New Cation-exchange Membrane

Study on Mass Transfer Performance and Membrane Resistance in Concentration of High Salinity Solutions by Electrodialysis

PERMSELFCTIVITY PROPERTIES OF SiO2/PVDF ION-EXCHANGE MEMBRANE

Experimental study on desalination of polyatomic alcohol solution by electrodialysis

Characterization and Performance Evaluation of Digital Light Processing 3D Printed Functional Anion Exchange Membranes in Electrodialysis

Effect of Ion Exchange Membrane on Desalination of PDO Fermentation Liquor Via Electrodialysis

Advancing electrodialysis with dually cross-linked PVDF-based anion exchange membranes having semi-interpenetrating networks

New PVDF Organic–inorganic Membranes: the Effect of SiO2 Nanoparticles Content on the Transport Performance of Anion-Exchange Membranes

Effects of inorganic ions on the transfer of weak organic acids and their salts in electrodialysis process

A Novel Porous Asymmetric Cation Exchange Membrane with Thin Selective Layer for Efficient Electrodialysis Desalination

Ion Transport Properties of Cation-Exchange Membranes Modified by Nano-Sized SiO2 Nanoparticles

Enhanced separation of monovalent and divalent ions in high salinity wastewater by selective electrodialysis: Experimental investigation and performance prediction

Effects of transport properties of ion-exchange membranes on desalination of 1,3-propanediol fermentation broth by electrodialysis

Mono-valent Cation Selective Membranes for Electrodialysis by Introducing Polyquaternium-7 in a Commercial Cation Exchange Membrane

Influences of hydrophobic tail length tuning of linear aliphatic di-cation functioned anion exchange membrane on electrodialysis desalination