Abstract:Ionic liquids, like bis(fluorosulfonyl)imide (FSI) ionic liquids, are promising solvents for lithium ion batteries due to their high thermal stability and wide electrochemical window. The performance of ionic liquid electrolytes is however hampered by the low conductivity at room temperature, but the high thermal stability allows for operation at elevated temperatures, at which the conductivity is significantly improved. Electrolytes based on LiFSI and ionic liquids of the cations; pyrrolidinium (PYR13 +), and phosphonium (P111i4 +), with FSI anions, have been shown to exhibit stable cycling at room temperature, and good rate performance for cells composed of silicon anodes and LiFePO4 cathodes at 60 °C [1,2]. The lithium ion mobilities, relative to standard carbonate electrolytes, were determined from the limiting current densities at room temperature and 60 °C. Significant differences in the temperature dependence of the transport properties were revealed, with a considerable increase in the lithium ion mobility from 20 to 60 °C for electrolytes based on P111i4FSI. The best rate performance at 60 °C was demonstrated for the P111i4FSI based electrolyte, with discharge capacities around 1000 mAh/gSi at a 2C rate [2]. The improved performance was attributed to a combination of the improved lithium ion mobility and formation of a more conductive solid electrolyte interphase (SEI) for this electrolyte. In view of the excellent high temperature performance of P111i4FSI, including high thermal stability and a large electrochemical window [1,2], this electrolyte has been selected for further studies as electrolyte for high voltage LiNi0.5-xMn1.5+xO4 (LNMO) cathodes. LiNi0.5-xMn1.5+xO4 (LNMO) is an attractive candidate as a next generation Li-ion battery (LIB) cathode material because it has a high energy density, due to the high operating voltage, and a relatively low cost (Co-free) compared to alternative cathode chemistries. However, the stability of LNMO is not yet satisfactory for commercial applications, especially in full-cell configuration with graphite as the anode material, and at elevated temperatures. One challenge is the transition metal (TM) dissolution, which poisons the graphite anode by degrading the solid electrolyte interface (SEI) [4]. The TM dissolution is affected by the formation of hydrofluoric (HF) acid in carbonate-based electrolytes utilizing the LiPF6 salt [3]. Additionally, the decomposition processes occur with an increased rate at elevated temperatures [4,5]. Another challenge is the side reactions occurring at the high operating voltage, which limits the coulombic efficiency. Previous works have indicated that the carbon conductive additive is more prone to side reactions than the LNMO active material [6]. Here, we present a study on the phosphonium-based ionic liquid P111i4FSI, with two different salt concentrations: 0.79 m LiFSI and 3.0 m LiFSI, as an alternative electrolyte for LIBs with an LNMO cathode.The focus of the research is to study the side reactions separately on the carbon conductive additive, and on the LNMO active material. Carbon conductive additives differing in structure and particle size are studied. The electrolyte is tested both in half-cell and full-cell configuration with a graphite anode, as well as at room temperature and elevated temperatures. Using 0.79 m LiFSI P111i4FSI results in similar capacity retention, but higher coulombic efficiencies after 200 cycles in half-cells at room temperature compared to 1 M LiPF6 in 1:1 EC:DEC (v/v). Post-mortem characterization is carried out with SEM, TEM, Raman spectroscopy, and FT-IR. References [1] D.T. Rogstad et al., J. Electrochem. Soc., 168 (2021) 110506 [2] Daniel Tevik Rogstad et al. 2022 Journal of the Electrochemical Society, 169, 110531 [3] Marc Wentker et al. 2019 Energies, 12, 504 [4] Nicholas P. W. Pieczonka et al. 2013 The Journal of Physical Chemistry C 117, 15947-15957 [5] U. Heider et al. 1999 Journal of Power Sources 81-82, 119-122, [6] Younesi et al., J. Electrochem. Soc., 162(7) (2015) A1289

Properties of LiNi 0.5Mn 1.5O 4 /Li cell in ionic liquid electrolyte based on N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide

Properties of LiNi<sub>0.5</sub>Mn<sub>1.5</sub>O<sub>4</sub> /Li Cell in Ionic Liquid Electrolyte Based on N-methyl-N-propylpiperidinium Bis(trifluoromethanesulfonyl)imide

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

Enhanced Stability at the Electrode-Electrolyte Interface in Ionic Liquid Electrolyte for 5 V Lithium-Ion Rechargeable Batteries

High-Voltage Graphite//LiNi0.5Mn1.5O4 Full Cell with Bis(fluorosulfonyl)Imide and bis(trifluoromethyl)Sulfonylimide Ionic Liquid Electrolytes

Phosphonium-Based Ionic Liquid Electrolyte in Combination with Silicon Anodes and LiNi0.5-XMn1.5+XO4 Cathodes for Lithium Ion Batteries

(Keynote) MnPO4-Coating for Improved Long-Term Performance of Li(Ni0.4Co0.2Mn0.4)O2 in Ionic Liquid-Based Electrolytes

Imidazolium-based ionic liquids as electrolyte additives for high-voltage Li-ion batteries

Thin Solid Polymer Electrolyte with High‐Strength and Thermal‐Resistant via Incorporating Nanofibrous Polyimide Framework for Stable Lithium Batteries

In Situ construction of PVDF/LLTO electrolyte with stable electrolyte/electrode interphase for integrated solid-state lithium batteries

Ionic‐Liquid–Nanoparticle Hybrid Electrolytes: Applications in Lithium Metal Batteries

Comparative Performance of LiFePO4 and LiNi0.6Co0.2Mn0.2O2 Cathode Materials for Lithium Batteries with Solid–liquid Hybrid Electrolytes

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Submicron lithium nickel manganese oxide spinel with long cycling stability and high rate performance prepared by a facile route

LiNO3 and TMP enabled high voltage room-temperature solid-state lithium metal battery

Realizing the Single-Crystalline LiNi 0.90 Mn 0.05 Co 0.05 O 2 Cathode with Long-Life and High-Safety Property Driven by Polysiloxane Covering and PO43- Doping

Ionic liquid boosting the electrochemical stability of a poly(1,3‐dioxolane) gel electrolyte for high‐voltage solid‐state lithium batteries

Synergistic effect of the PMIA nanofiber membrane with a dual-oriented network structure and Li0.5Bi0.5TiO3 nanofibers for high-performance lithium metal batteries

Reinforcing the Li|Li1.3Al0.3Ti1.7(PO4)3 Interfacial Stability by an Ultrathin Multifunctional Polysiloxane-Based Single-Ion Conducting Polymer

LiNO 3 and TMP enabled high voltage room-temperature solid-state lithium metal battery

Enhancing the interfacial stability of high‐energy Si/graphite||LiNi0.88Co0.09Mn0.03O2 batteries employing a dual‐anion ionic liquid‐based electrolyte