Abstract:The properties of anode material are crucial for high performances in microbial fuel cells (MFCs). Hereby, a biocompatible, conductive, and high electron transfer ability anode was fabricated by electrodepositing polypyrrole/anthraquinone-2, 6-disulphonic disodium salt (PPy/AQDS) onto nitric acid-soaked carbon felt. The results showed that the multi-modified anode outperformed the pristine one in biomass, electrical conductivity, and exchange current density with between 2.4 and 3.3 times better performance. The multi-modified anode (applied with 0.12 C·cm-2 total charge density) showed the highest peak current density (2.86 mA), the largest amount of biomass loading (0.44 mg·cm-2), the most favoured electrical conductivity (0.33 S·cm-1), and exchange current density (3.65×10-3 A·m-2), as a result, the maximum power density of the MFC equipped with the anode delivered a 2.2-fold increase over that of the control (1060.7 mW·m-2vs. 477.6 mW·m-2), and thus has great potential to be used as an anode for high-power MFCs. Further investigation revealed that the increased energy output might be attributed to the bridging of the carbon fibers by electrically conductive PPy/AQDS composite films, which provided a uniform connection throughout the nitric treated carbon felt as well as the synergetic effects between the newly formed functional groups like pyrrolic N and PPy/AQDS. It was proposed that integrating biocompatibility (BCB) with electrical conductivity (EC) and electron transfer efficiency (ETE) through multi-modification could form high-performance anode. Future efforts to be made for realizing more extraordinary high-performance MFCs anodes were also outlined. This work may also provide a novel universal approach for the development of other types of anode for high-performance MFCs through integrating the BCB with EC and ETE simultaneously.

Anode Modification by Electrochemical Oxidation: A New Practical Method to Improve the Performance of Microbial Fuel Cells

Electrochemical surface modification of carbon mesh anode to improve the performance of air-cathode microbial fuel cells

Anode Modification with Formic Acid: A Simple and Effective Method to Improve the Power Generation of Microbial Fuel Cells

Microbial Fuel Cell Anode Modified by Chemical Oxidation

Enhanced Electricity Generation for Microbial Fuel Cell by Using Electrochemical Oxidation to Modify Carbon Cloth Anode

Coupling of Anodic and Cathodic Modification for Increased Power Generation in Microbial Fuel Cells

Modification of Carbon Felt Anodes Using Double-Oxidant HNO3/H2O2 for Application in Microbial Fuel Cells

Hydrazine hydrate chemical reduction as an effective anode modification method to improve the performance of microbial fuel cells

Improved Performance of Membrane Free Single-Chamber Air-Cathode Microbial Fuel Cells with Nitric Acid and Ethylenediamine Surface Modified Activated Carbon Fiber Felt Anodes.

Modification with Fenton's Reagent on the Anode of Benthic Microbial Fuel Cell and Its Electrochemical Property

Enhancing microbial fuel cell performance using anode modified with Fe 3 O 4 nanoparticles

Boosting the anode performance of microbial fuel cells with a bacteria-derived biological iron oxide/carbon nanocomposite catalyst

Improving the Performance of Microbial Fuel Cells Through Anode Manipulation

Anode Modification with Capacitive Materials for a Microbial Fuel Cell: an Increase in Transient Power or Stationary Power

Surface Modification of Microbial Fuel Cells Anodes: Approaches to Practical Design

The Materials Employed for Anode of Microbial Fuel Cell

Anode Decoration with Biogenic Pd Nanoparticles Improved Power Generation in Microbial Fuel Cells

Increasing Power Generation of Microbial Fuel Cells with a Nano-Ceo2modified Anode

High‐efficiency Nitric Acid‐PPy/AQDS Coupling Treated Bioanodes Based Microbial Fuel Cell

Modification of the anodes using MoS<sub>2</sub> nanoflowers for improving microbial fuel cells performance

[Analysis and Characterization of Multi-modified Anodes Via Nitric Acid and PPy/AQDS in Microbial Fuel Cells].