Abstract:Development of high energy conversion and environment-friendly proton exchange membranes is important for the commercial exploitation of fuel cell technologies. The performance of proton exchange membrane fuel cells (PEMFCs) is highly dependent on the physico-chemical properties of the proton exchange membranes. Thus, we have developed the sulfonated poly(vinyl alcohol) (sPVA) membranes incorporated with 1.5 mass% of sulfonated nano-silica and then crosslinked with different crosslinkers, such as formaldehyde, glutaraldehyde, poly(styrene sulfonic acid-co-malic acid) (PSSA-MA) and tetraethyl orthosilicate (TEOS). The physico-chemical properties of the resulting crosslinked membranes were investigated using Fourier transform infrared spectrometer (FT-IR), wide-angle X-ray diffractometer (WAXD), atomic force microscope (AFM), differential scanning calorimeter (DSC) and thermogravimetric analyzer (TGA). The mechanical properties of the membranes were studied using universal testing machine (UTM). The proton conductivity and dielctric properties of the membranes were measured using a high precession impedance analyzer. The water uptake ratio, swelling ratio and ion exchange capacity of the membranes were evaluated and discussed based on their molecular structures. The fuel cell performance of the membranes was determined at 80 °C using a fuel cell workstation. Among the membranes developed, TEOS crosslinked composite membrane (sPVA-Si/TEOS) demonstrated the highest mechanical strength, ion exchange capacity and proton conductivity. The ion exchange capacity and proton conductivity were found to be 1.1 meq g-1 and 0.56 S cm-1, respectively. The same membrane demonstrated the highest power density of 0.70 W cm-2 at current density of 1.25 A cm-2. These data were compared with the commercially available Nafion® 117 and 212 membranes. The sPVA-Si/TEOS composite membrane showed better performance than those of Nafion® 117 and 212 membranes with greater economic viability. Thus, TEOS could be of potential crosslinker for sulfonated poly (vinyl alcohol)-silica incorporated hydrophilic membrane and could be employed as a promising candidate for fuel cell application.

Sulfonated polystyrene/PTFE as proton exchange membrane for PEM fuel cell application

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

Crosslinked Sulfonated Poly (Bis-A)-sulfones As Proton Exchange Membrane for PEM Fuel Cell Application

Cross-linked sulfonated poly(phathalazinone ether ketone)s for PEM fuel cell application as proton-exchange membrane

Challenging reinforced composite polymer electrolyte membranes based on disulfonated poly(arylene ether sulfone)-impregnated expanded PTFE for fuel cell applications

Proton exchange membranes based on sulfonated polybutylene fumarate: Preparation and characterization

Novel postsulfonated poly(ether ether ketone)-block-poly(ether sulfone)s as proton exchange membranes for fuel cells: Design, preparation and properties

Poly(Arylene Ether)s with Sulfonic Acid Groups on the Backbone and Pendant for Proton Exchange Membranes Used in PEMFC Applications

A New Crosslinked Sulfonated Polystyrene for Proton Exchange Fuel Cell Membrane

Submicro-Pore Containing Poly(Ether Sulfones)/Polyvinylpyrrolidone Membranes For High-Temperature Fuel Cell Applications

Sulfonated Polybenzothiazoles Containing Hexafluoroisopropyl Units for Proton Exchange Membrane Fuel Cells

Branched Sulfonimide-Based Proton Exchange Polymer Membranes from Poly(Phenylenebenzopheneone)s for Fuel Cell Applications

Polymer Electrolyte Membranes Based on Poly(Phenylene Ether)S with Sulfonic Acid Via Long Alkyl Side Chains

Proton-conducting membranes from poly(ether sulfone)s grafted with sulfoalkylamine

Proton conducting composite membranes based on sulfonated polysulfone and polysulfone-g-(phosphonated polystyrene) via controlled atom-transfer radical polymerization for fuel cell applications

Novel Interpenetrating Polymer Network Sulfonated Poly (phthalazinone Ether Sulfone Ketone)/polyacrylic Acid Proton Exchange Membranes for Fuel Cell

Properties and Fuel Cell Performance of Proton Exchange Membranes Prepared from Disulfonated Poly(sulfide Sulfone)

PTFE-reinforced Pore-Filling Proton Exchange Membranes with Sulfonated Poly(ether Ether Ketone)s and Poly(aryl Ether Sulfone)s

Development of robust proton exchange membranes using sPVA-Silica composite with different crosslinkers and evaluation of their fuel cell performance

High conductive and dimensional stability proton exchange membranes with an all-carbon main chain and densely sulfonated structure

Synthesis of highly proton-conductive poly(arylene ether sulfone) bearing perfluoroalkyl sulfonic acids via polymer post-modification