Abstract:With the exploitation of the unconventional reservoirs such as tight sand and shale,fracturing technique plays an important role in the reservoir reconstruction.Through inverting the microseismic(MS) location effectively,it can forecast the development tendency of manmade fracture and becomes one of the key and immediate techniques to provide the evaluations for the post-fracture response,directions for the exploitation and designs for the re-fracturing.The key role of the MS monitoring is both inverting the location of the microfracture which triggers the MS signal and describing the geometry of the fracture system effectively,therefore,it is important to get a high precision location.The location precision directly affects the distribution of the manmade fracture,and the false or low precision location will result in the misjudgment of the fracture tendency.However,it is very difficult to get a high precision MS location because it is very sensitive to the first arrival,velocity,inversion algorithm and so on.This paper firstly discusses the first arrival influence on the location precision.Through the numerical simulation it can get that the first arrival has a strong effect on the location precision,and there exists a proximate proximatey linear relation between the first arrival error and the location error.The paper discusses the influences of rock property,the calibrated velocity,anisotropy velocity,the layer dip,multi-stage fracture on the velocity and location precision.Before the fracturing,the bulk and shear modulus can be considered to be constant.With the liquid and filling material injection,the density and the modulus increase and they may result in the change of velocity.The static velocity model may result in the location error because a static velocity is used in the location.In addition,a horizontal isotropy velocity is usually used in the location and may result in the location error because of dip and anisotropy in the real layer.Moreover,it is easy to ignore that a fixed velocity model is used in multi-stages fracture and may result in the location error.Finally,the paper analyses the location algorithm influence on the location error.The inversion is the universal location method,but the inappropriate option function and criteria which may result in the local extremum.Meanwhile,the azimuth also has a strong effect on the location precision.Through the theoretical analysis and numerical simulation,the first arrival error,velocity error and location algorithm have a tight relationship with the location precision.Some kinds of location errors are controllable,and some errors are systematic.Through differentiating the controllable and systematic errors,it can give some suggestions for the high precision processing flow research and the actual data processing.

Accurate Microseismic Event Location Inversion Using a Gradient-Based Method

Joint Microseismic Moment-Tensor Inversion and Location Using P- and S-wave Diffraction Stacking

Transdimensional simultaneous inversion of velocity structure and event locations in downhole microseismic monitoring

Microseismic Event Location Using an Inverse Method of Joint P–S Phase Arrival Difference and P-wave Arrival Difference in a Borehole System

Microseismic Event Location Using Reverse‐Time Focusing and Interferometric Techniques for Surface and Borehole Observations

The Precision Analysis of the Microseismic Location

Microseismic moment-tensor inversion and sensitivity analysis in vertically transverse isotropic media

Downhole Microseismic Monitoring for Low Signal-To-Noise Ratio Events

Estimating geomechanical parameters from microseismic plane focal mechanisms recorded during multistage hydraulic fracturing

Rock Fracture Monitoring Based on High-Precision Microseismic Event Location Using 3D Multiscale Waveform Inversion

High-Accuracy Location of Microseismic Events in a Strong Inhomogeneous Mining Environment by Optimized Global Full Waveform Inversion

Microseismic events location of surface and borehole observation with reverse-time focusing using interferometry technique

Microseismic Velocity Model Inversion and Source Location: the Use of Neighborhood Algorithm and Master Station Method

Joint Inversion of Perforations and Microseismic Events

Downhole Microseismic Source Location Based on a Multi-Dimensional DIRECT Algorithm for Unconventional Oil and Gas Reservoir Exploration

Time Difference-Based Velocity Model Inversion for Microseismic Event Location

Using Microseismic Events to Improve the Accuracy of Sensor Orientation for Downhole Microseismic Monitoring

Source-independent Wave-Equation Based Microseismic Source Location Using Traveltime Inversion

Imaging Hydraulic Fractures by Microseismic Migration for Downhole Monitoring System

Velocity Calibration for Microseismic Event Location Using Surface Data

Back azimuth constrained double-difference seismic location and tomography for downhole microseismic monitoring