Abstract:China lead bismuth eutectic (LBE) cooled fast reactor comprises of the primary system with lead bismuth eutectic (LBE) as the coolant, the secondary circuit with sub-cooled water as the coolant and the associated air cooling system for an effective rejection of thermal power to the environment as a final heat sink. The dynamic characteristics of LBE cooled fast reactor are different from the traditional Pressurized Water Reactors (PWRs) because of the variances in coolant properties as well as major differences due to the operation in the fast versus the thermal neutron spectrum. To investigate the dynamic characteristics of the CLEAR-IA reactor for control system design and simulation, a model for the main components of the reactor and the most relevant interactions among them is developed. Since all the coefficients in the models are functions of temperature, the models in this paper are not described by ordinary differential equation. These models are realized by using the S-function builder of SIMULINK. The steady state calculation result based on the thermal-hydraulic models show agreement with the design value. To show the proposed models could be used for the simulation, the transient process of parameter change is compared with Relap5 simulation code, which shows agreement. A Proportional-Integral (PI) controller is designed to keep the power following the set value as quickly as possible. To keep the inlet temperature of core coolant constant, a control strategy based on a simultaneous feed-forward and feedback scheme has been adopted. The feed-back control system is a PI controller and it can achieve a real time and no error control, but it has time delay. The feed-forward control can realize the control in advance before the LBE temperature at inlet of the core has been changed to reduce the overshoot. So the feed-forward can realize an advance and rough control, the feedback can realize a no error and accurate control. Based on the developed model and control strategy, dynamic simulations of the whole system in case of step changes of reactivity and set power are performed. The simulation results show that the proposed model is accurate enough to describe the dynamic behaviors of the plant in spite of its simplicity. It has also been demonstrated that the developed controllers for the CLEAR-IA can provide superior reactor control due to the efficiency of the control strategy adopted.

Equivalent Method for Control System in HTR Simulator

Equivalence of control rod model in high temperature gas-cooled reactor

The improvement of the method of equivalent cross section in HTR

Simultaneous Approach for Simulation of A High-Temperature Gas-Cooled Reactor

A Simulation Method for Nuclear Power Plant with High-Temperature Gas-Cooled Reactor

Reactor Core Physics Simulation Method for Htr

Study on dynamic characteristics of HTR-10 at full power operation

Application of Improved Quasi-Static Method to High Temperature Gas Cooled Reactor Simulator

Modeling and Simulation of BWR Mechanism Based on RELAP5

A Personal Computer-Based Engineering Simulator for High Temperature Gas-Cooled Reactor

A Personal Computer-Based Simulation-And-Control-Integrated Platform for 10-Mw High-Temperature Gas-Cooled Reactor

Simulation Of Separate Meter In And Separate Meter Out Control Of Electro Hydraulic Load Sensing System

A Personal Computer-Based Simulator For Nuclear-Heating Reactors

Modeling and Simulating of Power Regulating System of a Research Reactor

Simulation of Thermal-Hydraulic Process in Reactor of HTR-PM Based on Flow and Heat Transfer Network

Operation and Control Simulation of a Modular High Temperature Gas Cooled Reactor Nuclear Power Plant

Research on Simulator System with Virtual Technology Method for High Temperature Gas-Cooled Reactor

Equivalence Method and Transient Flow Characteristics of the Integrated Valve

Modeling and Control Strategy of the China LBE Cooled Fast Reactor

Simulation Study of Nuclear Heating Reactor Control Method in Slight Boiling Operation Mode

Coupled Neutron Dynamic and Thermal Hydraulic Models of the HTR Simulator