Abstract:Tritium (H-3) can discharge mainly in the form of HT and/or HTO as gaseous and/or liquid waste into the environment from the nuclear power plant, and participate in the cycle among hydrosphere, atmosphere and biosphere, which would lead to the long-term radiological effects on organisms. Thus, in the daily operation of the nuclear power station, tritium became one of the most concerned nuclides in the source term analysis. In high temperature gas-cooled reactors (HTGRs), tritium was mainly generated by the ternary fission reaction of heavy nuclei in the fuel and neutron activation reaction of impurities like lithium-6 (Li-6), lithium-7 (Li-7) and boron-10 (B-10) in the graphite matrix, carbon bricks, etc. Tritium would be resorted completely in the intact tristructural-isotropic (TRISO) coated particles, while tritium in the graphite can diffuse into the primary loop depending on the local temperature. In the helium purification system of a typical HTGR, the molecular adsorber can adsorb the tritium in the primary coolant, and then the tritiated water was formed from the regeneration and desorption process of the molecular adsorber. Meanwhile, since the high permeability of tritium at a high temperature, it can permeate into the secondary loop through stainless steel heat exchange tube from the primary loop, and entered into the environment with leakage of the secondary water. Therefore, it was very important to analyze the production, transport and release mechanism of tritium for the estimation of the inventory and distribution of tritium in a nuclear power plant. With the rapid development of nuclear energy and the commercial application of HTGRs, tritiated water treatment technologies attracted more attention in the field of radioactive nuclear waste. Current paper will introduce and summarize general tritiated water treatment technologies, including water distillation, tritium sorbent process, palladium membrane reaction (PMR), and combined electrolysis catalytic exchange (CECE).

Main Pollutants From Inland AP1000 NPP Liquid Radioactive Effluents and Their Treatment Technologies

Discharge Capacity Analysis of Liquid Effluent Discharge System at CPR1000 Nuclear Power Plant

Research on Wastewater Source Term in High-Temperature Gas-Cooled Reactor and the Environmental Impact at Inland Sites

Fundamentals and Environmental Applications of Non-thermal Plasmas: Multi-pollutants Emission Control from Coal-Fired Flue Gas

Water Environmental Impact of Radioactive Liquid Effluents from Inland Nuclear Power Plant

COMPARISION OF ENVIRONMENTAL RADIOLOGICAL IMPACTS FOR THREE TYPES OF PWR NUCLEAR POWER PLANT

Advanced porous materials and emerging technologies for radionuclides removal from Fukushima radioactive water

Generation III Pressurized Water Reactors and China’s Nuclear Power

Progress in Treatment Processes of Radioactive Wastewater from Nuclear Accident

Radioactive Wastewater Treatment Technologies: A Review

A SUMMARY OF THE CLEARANCE PRACTICE OF THE SPENT RESIN FROM NUCLEAR POWER PLANTS IN CHINA

Current status and technical description of Chinese 2×250MWth HTR-PM demonstration plant

A Comprehensive Study of the 14C Source Term in the 10 MW High-Temperature Gas-Cooled Reactor

Calculation and analysis of water activation products source term in AP1000

On the Issues of Fuel Storage and Decommissioning of the HTR-10 Test Reactor

Study on the actual particle size, activity concentration, and migration process adsorption behavior of radioactive substances in liquid effluents from nuclear power plants

Design of the Process and Effluent Radiation Monitoring System of Htr-Pm

Generation and Distribution of Tritium in HTGRs and Review on the Tritiated Water Treatment Technologies

Distribution laws for radioisotopes in receiving freshwater of Inland Nuclear Power Plant

Sustainable Development of Nuclear Energy and Study on ADS in China

Progress in Research of Spent Fuel Reprocessing and High-level Liquid Waste Partitioning Integrated Process