POWER OPTIMAL CONTROL FOR MICRO PHOTOVOLTAIC DISTRIBUTION GENERATION SYSTEM

Xiaofeng Sun,Yida Jiang,Qiang Wang,Xin Li

DOI: https://doi.org/10.3969/j.issn.0254-0096.2012.10.023

2012-01-01

Abstract:The DC distributed power generation system is composed of PV module, battery and fuel cell. Voltage level signal and the bus voltage rising adjustment is combined to control the system. Then its control principles and specific control methods were explained. This method can achieve the optimal assign of energy among the distribution generators by using the signal of bus voltage. The PV modules can make full use of renewable energy and work stably in light loads by combining MPPT and the bus voltage regulatory control. Effective control methods were adopted for the interface converters of the battery and the fuel cell, through which the battery and the fuel cell could be charge or discharge timely in the presence of fluctuating output power of the PV array or loads. It ensured the stability of the bus voltage and achieved the balance of the system's energy. At the same time the affect of the impact load was taken into account. The rising control would decrease the impact of the line impedance on the bus voltage. This control method has the advantages of high reliability, simple control structure and high bus voltage. The control interface structure of the power converter and optimal energy control of the system was presented. A simulation results verify that the control method is right.