Structural parameters of venturi injector for periodic air recovery based on response surface methodology
Lianjun Chen,Zhenjiao Sun,Hui Ma,Kang Gao,Guanguo Ma,Yongjing Deng
DOI: https://doi.org/10.1016/j.cep.2023.109551
IF: 4.264
2023-09-15
Chemical Engineering and Processing - Process Intensification
Abstract:This work is devoted to the study of the structural parameters of a venturi injector for periodic air recovery. Using a push chain concrete spraying machine as a case, a numerical simulation study was conducted on the venturi injector under different structural parameter combinations. The venturi injector structure parameters diameter ratio of the throat to pipe a , convergent angle α , throat length to diameter ratio b , and diffusional angle β are designed and combined by the response surface method. The numerical simulation results and the prediction model obtained by the response surface method were verified by experiments, and the simulation results and prediction model were in good agreement with the experimental results. The results show that the residual air recovery of the push chain concrete spraying machine is best when a, α, b, and β are 0.8, 25°, 2.5, and 10°, respectively. In addition, the quadratic polynomial response surface model of the venturi injector pressure variation coefficient C v and pressure drop P d concerning the structural parameters was established, and the influence rules of each structural parameter on the C v and P d were obtained. The variation patterns of turbulent kinetic energy in the venturi at different times and stable sections at the back end are revealed. This paper can provide help for the design of venturi structures used for periodic air recovery in other chemical fields.
energy & fuels,engineering, chemical