Abstract:Abstract The Cahn-Hilliard phase field method for two-phase flow has gained particular attention due to its unique features including its flexibility for complex morphological and topological changes, the intrinsic property of conserving mass, and the natural approach to account for the surface tension. The essential idea of the method is to use a phase field function to describe the two-phase system, while a thin smooth transition layer (interfacial area) connects the two immiscible fluids, where the value of phase field function varies continuously. The application of phase field method to two-phase flows has become more widespread recently, but to the best of our knowledge, very little progress has been made for the method being applied to the two-phase flows with phase change. This includes evaporation, condensation and boiling, which plays an important role in enhanced heat transfer in power electronics, energy, and aerospace engineering. In previous work, in order to face the challenge of large density contrast and high Reynolds number of practical engineering problems, we developed a stabilized phase field method that can handle two-phase flow with density ratio over 1000, at high Reynolds number over 10,000, and applied the method to simulate slug initiation in a long circular pipe. In this paper, inspired by the boiling model widely used in the level-set method, we propose a new boiling model that assumes that boiling takes place in the whole interfacial layer. The method is then used to solve the non-solenoidal Navier-Stokes equations. The boiling model is validated by simulating a vapor bubble growing in super-heated liquid. For this case, the growth rate of the bubble has an analytical solution, and it is used as a benchmark case in volume of fluid (VOF) and level-set methods extensively. For three different refrigerants, namely water, R134a and HFE7100, our phase field method with the boiling model can obtain accurate simulation results. Moreover, the method and model are applied to predict the three-dimensional boiling heat transfer in a rectangular micro-channel that contains a water vapor bubble with various inlet super-heat conditions. We found that the predicted bubble shape is very similar to that visualized in existing experiment. From our simulation of boiling flow using the phase field method, We have found that the required mesh resolution for the phase field method is comparable with that of VOF and level-set methods.

Transient Simulation Code for Flow Boiling Based on Two-Fluid Model

Two-phase Flow Oscillation and Distribution in Parallel Channels During R1233zd(E) Subcooled Flow Boiling: A Numerical Study

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

Development of a Sub-Channel Analysis Code Based on the Two-Fluid Model and Its Preliminary Assessment

Development and assessment of a three-field subchannel code for thermo-hydraulic transient analysis under reflood conditions

Study on Application of Two-Fluid Model in Narrow Annular Channel

Development and Validation of a Two-Phase Flow Solver with Drift-Flux Model Based on OpenFOAM

Development of a Two-Fluid Based Thermal-Hydraulic Subchannel Analysis Code with High-Resolution Numerical Method

Numerical Simulation of Multi-Dimensional Two-Phase Transient Flow across Bundles

Interface Capturing Flow Boiling Simulations in a Compact Heat Exchanger

Transient Numerical Simulation and Two-phase Flow Instability Prediction of Convective Boiling in Vertical Up-flow Tube

A Phase Field Method for Numerical Simulation of Boiling Heat Transfer

Coupled two-fluid flow and wall heat conduction modeling of nucleate pool boiling

Investigation on the Subcooled Boiling in Vertical Pipe with Uncertainties from Boundary Conditions by Using FLUENT

Numerical Simulation Of Wet Steam Condensing Flow Based On A Two-Fluid Model

Numerical Simulation of Two-phase Flow in Subcooled Boiling Region of Steam Generator

A TWO-FLUID MODEL FOR NUMERICAL SIMULATION OF SUBCOOLED BOILING FLOW OF LIQUID NITROGEN

Development of subcooled wall boiling model considering bubble sliding in narrow rectangular channel

Numerical Simulation of Micro Scale Flowing and Boiling

Analysis of Spatial Nonuniform Behaviors of Subcooled Flow Boiling Employing Euler-Lagrange Approach

Implementation and validation of two-phase boiling flow models in OpenFOAM