Abstract:NHR200-II is a 200 MW nuclear heating reactor. The integrity of the fuel assembly should be ensured during the normal operations and design basis accidents. In the latter cases (e.g. earthquake), its deformation or damage should not prevent the insertion of control rods to shut down the reactor. Meanwhile, during the operating time, there are two aspects that attention should be paid, (i) the mechanical performance of internal core materials might be worsened by the increase of burnup and (ii) dynamic loads involving hydraulic erosion, flow-induced vibration might damage the assemblies. Therefore, the investigation of the dynamic characteristics of the fuel assembly with consideration of burnup effects is necessary. The fuel rod with pellets and cladding was approximated by the beam elements with a circular cross-section applied with calibrated material properties. Connector elements were used to replace the three-arc springs and dimples on the grid and thus simplify the geometry of the spacer grid. The agreements between the detailed and simplified models indicate the equivalence of these two methods. Then two simulations were performed to evaluate the dynamic characteristics of NHR200-II fuel assembly at the beginning of life. The modal simulation of the fuel bundle and channel suggests that the channel could be assumed stationary to the fuel bundle during the dynamic analysis. The seismic simulation conducted in the specific boundary conditions indicates that the integrity of spacer grids can be guaranteed and there was no buckling of the gird. No permanent deformation of the channel was observed, and its relative displacements were sufficiently small to ensure the insertion of control rods. Finally, burnup effects on the structural behavior of the fuel rod are discussed. The initial conditions of NHR200-II fuel assembly and its material properties at different burnup times are provided by referring to two irradiated tests. Various sensitivity analyses had been conducted to evaluate the effects of material properties and pellet-cladding interaction on the resulting failure limit and stiffness of the fuel rod.

Thermal Strain of Fuel Rods During Transient of Operation Transformation

Thermal Analysis on NAC-STC Spent Fuel Transport Cask under Different Transport Conditions

Three-dimensional FE analysis of the thermal-mechanical behaviors in the nuclear fuel rods

Modeling and Simulation of BWR Mechanism Based on RELAP5

Numerical Simulation and Investigation on Natural Circulation Cooling Transient Process for Spent Fuel Assembly in Sodium-cooled Fast Reactor

Development of fuel rod behavior analysis code and its application to supercritical CO2 cooled nuclear reactor

Simulation of the In-Pile Behaviors Evolution in Nuclear Fuel Rods with the Irradiation Damage Effects

Transient Characteristics of Typical Design Basis Accidents in Integrated Small Reactor NHR200-II Using RELAP5 Model

Simulation of Dynamic Characteristics of NHR200-II Fuel Assembly

Improved Radiation Heat Transfer Model in RELAP5 for Compact Fuel Rod Bundles by the Absorption Factor Modification

Numerical Simulation of the Transient Flow Characteristics and Thermal Stratification Phenomena in the Passive Residual Heat Removal System of NHR-200-II

Coupled Modeling and Simulation of Phase Transformation in Zircaloy-4 Fuel Cladding Under Loss-of-Coolant Accident Conditions

Study on coupling effect of CRUD growth and heat transfer on fuel rod

Analysis of Thermal Stratification Effects in the Ring Headers of the Passive Residual Heat Removal System of NHR-200-II

Comparative Thermal Analyses Between Theoretical Mode and RELAP5 Code Simulation for OTSG of a Small PWR

Neutronics and thermal-hydraulics coupling analyses on transient and accident behaviors of molten chloride salt fast reactor

Analysis on Pellet-Cladding Interaction of Fuel Rod During Power Ramp of NHR200-II

Thermal-hydraulic characteristics analysis of unprotected accident and protection control strategy for helium-xenon cooled reactor system

Coupled irradiation-thermal-mechanical analysis of the solid-state core in a heat pipe cooled reactor

Thermal-fluid-structure Coupling Analysis for Plate-Type Fuel Assembly under Irradiation. Part-I Numerical Methodology

A numerical model to investigate the irradiation effect on the dynamics of nuclear fuel bundles