Abstract:The vanadium redox flow battery (VRFB) store chemical energy and generate electricity by redox reactions between vanadium ions dissolved in electrolytes. The main components of VRFB are positive and negative porous electrodes, membrane, current collectors, electrolyte, and pumps. The electrolyte is composed of vanadium species and supporting electrolytes. The supporting electrolyte has two main functions: 1) to increase the electrolyte's ionic conductivity, and 2) to deliver hydrogen ions to the positive electrode reaction. The supporting electrolytes are many kinds of an acid such as sulfuric acid, hydrochloric acid, methane sulfonic acid, etc. Some study has been done to improve the performance of VRFB a mixed electrolyte supporting. Zhang et al. proved that the stabilities of vanadium ions in sulfuric acid solution could be improved marginally by adding some additives as stabilizing agents 1 . Sha et al studied the effect of organic additives on positive electrolyte for vanadium redox battery They found that the energy efficiency for the electrolyte with D-sorbitol was higher than that electrolyte without additives 2 . Chang et al investigated coulter dispersant IIIA additive into the positive electrolyte 3 . The obtained result showed that the coulter dispersant IIIA increased the stability of the positive electrolyte in VRFB. According to the authors' knowledge, there is no a numeric study that comparing, the supporting electrolyte used in a VRFB. The aim of this study is to perform comparatively a numerical analyze of the supporting electrolyte of H 2 SO 4 and HCl in the negative and positive electrodes. To achieve these objectives a two-dimensional model is developed with COMSOL Multiphysics under some assumptions and boundary conditions. The electrolyte potential is deeply investigated through the state of charge (SOC). The simulation result shows that the difference in the electrolyte potential between the supporting electrolyte of H 2 SO 4 and HCl, the supporting electrolyte of H 2 SO 4 possesses a higher potential compared to the HCl. This phenomenon is strongly related to the number of hydrogen protons delivered by the supporting electrolyte of H 2 SO 4 which is more compared to that of HCl 4 . Acknowledgement The authors would like to thank the Scientific Research Projects Unit of Erciyes University for funding under the contract no: FDK-2019-9340. Reference 1. J. Zhang et al., J. Appl. Electrochem., 41, 1215–1221 (2011). 2. S. Li et al., Electrochim. Acta, 56, 5483–5487 (2011). 3. F. Chang, C. Hu, X. Liu, L. Liu, and J. Zhang, Electrochim. Acta, 60, 334–338 (2012). 4. H. Yan et al., Membranes (Basel)., 10, 1–15 (2020). Figure 1

Effect of Polyhydroxy-Alcohol on the Electrochemical Behavior of the Positive Electrolyte for Vanadium Redox Flow Batteries

Effect of complex additives on the positive electrolyte for all-vanadium redox flow battery

Investigation on electrode reaction mechanism for vanadium redox flow battery

Effects of additives on electrolytes and the performance of vanadium battery

Mitigating Capacity Decay by Adding Carbohydrate in the Negative Electrolyte of Vanadium Redox Flow Battery

AC Impedance of Influence of Glycerin on All Vanadium Redox Flow Battery Anodic Electrolyte

Catholyte electrolyte stability for all-vanadium redox battery

Effect of electro-oxidation current density on performance of graphite felt electrode for vanadium redox flow battery

A Review of Electrolyte Additives in Vanadium Redox Flow Batteries

Characterization and comparison of organic functional groups effects on electrolyte performance for vanadium redox flow battery

Effect of In3+ Ions on the Electrochemical Performance of the Positive Electrolyte for Vanadium Redox Flow Batteries

Numerical Investigation of Supporting Electrolyte Using in a Vanadium Redox Flow Battery

Study on the effect of electrode configuration on the performance of a hydrogen/vanadium redox flow battery

High Performance Positive Electrolyte with Potassium Diformate (KDF) Additive for Vanadium Redox Flow Batteries

Preparation and Electrochemical Properties of Graphene‐Modified Electrodes for All‐Vanadium Redox Flow Batteries

Research progress in preparation of electrolyte for all-vanadium redox flow battery

Boosting the Thermal Stability of Electrolytes in Vanadium Redox Flow Batteries Via 1-Hydroxyethane-1,1-diphosphonic Acid

Improved energy density and temperature range of vanadium redox flow battery by controlling the state of charge of positive electrolyte

Different Treatments for Positive and Negative Electrode Materials of an All-Vanadium Redox Flow Battery

Study on the Effects of Electrode Fiber and Flow Channel Arrangements on Mass Transfer and Electrochemical Performance of Vanadium Redox Flow Batteries

Preparation and Electrochemical Properties of High Purity Mixed-Acid Electrolytes for High Energy Density Vanadium Redox Flow Battery