Abstract:To improve capacity and electrochemical performance of the cathode of Li-ion batteries, non-stoichiometric, vanadium-excess (V-excess) Li3V2(PO4)3-LiVOPO4/C (LVP-LVOP/C) composite cathode materials are synthesized by a single-step citric acid assisted sol–gel method and sintered at temperatures (300–900 °C). X-ray diffraction and transmission electron microscope results indicate that major Li3V2(PO4)3 and minor LiVOPO4 phases coexist and X-ray photoelectron spectroscopy results also show that the valance state of vanadium is + 4 and + 3. The sample sintered at 800 °C shows the best electrochemical performance with the highest discharge capacity of 140 mAh g−1 at 0.2 C, higher than the theoretical capacity of Li3V2(PO4)3 in the voltage range 2.8–4.3 V. The composite material displays remarkably improved stability exhibiting reversible capacity of 130, 115, and 108 mAh g−1 after 300, 500, and 1000 cycles at the rate of 0.3 C, 0.5 C, and 1 C, respectively. Additionally, the composite LVP-LVOP/C shows superior rate performance at various current densities from 0.2 to 10 C. Our study reveals that the novel composite material considerably enhances electrochemical performance, electronic conductivity, Li-ion diffusion, and contribution of LiVOPO4 to capacity by accommodating extra Li-ions to enhance capacity. The results demonstrate that the study is highly promising for the development of V-excess cathodes as V-excess composite materials exhibit better performance than pure phase Li3V2(PO4)3.

Porous Li3V2(PO4)3/C Cathode with Extremely High-Rate Capacity Prepared by a Sol–gel-Combustion Method for Fast Charging and Discharging

Carbon decorated Li3V2(PO4)3 for high-rate lithium-ion batteries: Electrochemical performance and charge compensation mechanism

The Li3V2(PO4)3/C Composites with High-Rate Capability Prepared by a Maltose-Based Sol–gel Route

Electrochemical Performance of Nanocrystalline Li3V2(PO4)3/carbon Composite Material Synthesized by a Novel Sol–gel Method

A Li3V2(PO4)3/C Thin Film with High Rate Capability As a Cathode Material for Lithium-Ion Batteries

Fast-Charging Cathodes from Polymer-Templated Mesoporous LiVPO4F

Hydrothermal Synthesis of Plate-Like Carbon-Coated Li3V2(PO4)3 and Its Low Temperature Performance for High Power Lithium Ion Batteries

Off-stoichiometric Li3-3xV2+x(PO4)3/C As Cathode Materials for High-Performance Lithium-Ion Batteries

Structural and electrochemical characterization of vanadium-excess Li3V2(PO4)3-LiVOPO4/C composite cathode material synthesized by sol–gel method

Synthesis and Characterization of Carbon-Coated Li3V2(PO4)3 Cathode Materials with Different Carbon Sources

3D porous Li3VO4@C composite anodes with ultra-high rate capacity for lithium-ion capacitors

Electrochemical performance of the carbon coated Li3V2(PO4)3 cathode material synthesized by a sol–gel method

Enhanced electrochemical performance of LiVPO4F/C composite with in-situ generated Li3V2(PO4)3 for lithium-ion batteries

Passion fruit-like structure endows Li3V2(PO4)3@C/CNT composite with superior cyclic stability and rate performance

Li3V2(PO4)3-coated Li1.17Ni0.2Co0.05Mn0.58O2 As the Cathode Materials with High Rate Capability for Lithium Ion Batteries

Hierarchical Porous N-Doped Carbon Nanofibers with Encapsulated Li 3 VO 4 Nanoparticles for Lithium-Ion Storage

Insights into the enhanced sodium storage property and kinetics based on the Zr/Si codoped Na3V2(PO4)3/C cathode with superior rate capability and long lifespan

Preparation of LiFePO4/Li3V2(PO4)3/C composite cathode materials and their electrochemical performance analysis

Bicontinuous Structure of Li3v2(Po4)(3) Clustered Via Carbon Nanofiber As High-Performance Cathode Material of Li-Ion Batteries

Preparing Li6V3(PO4)5 Cathode with Boron‐Doped Carbon Layer as a Cathode Material for Lithium‐Ion Batteries

Key design considerations for synthesis of mesoporous α-Li3V2(PO4)3/C for high power lithium batteries