On the poisoning effect of O2 and N2 for the Zr0.9Ti0.1V2 hydrogen storage alloy

T.B. Zhang,X.W. Yang,J.S. Li,R. Hu,X.Y. Xue,H.Z. Fu

DOI: https://doi.org/10.1016/j.jpowsour.2011.12.002

IF: 9.2

2012-01-01

Journal of Power Sources

Abstract:Homogeneously annealed Zr 0.9Ti 0.1V 2 samples are firstly exposed to contamination gases of O 2 and N 2 for 30, 60 and 180 s at the ambient temperature, respectively. Hydrogen absorption properties are examined after poisoning and regeneration. The compositions and valence in the surface and sub-surface are investigated by X-ray photoelectron spectroscopy (XPS). The hydrogen absorption capacity of the alloy has been almost entirely degraded by the oxygen poisoning. After the regeneration, the oxygen-poisoned sample can hardly absorb hydrogen while the nitrogen-poisoned sample re-obtains the hydrogen absorption capacity with the value as 2.85 H A -1 (molar ratio of hydrogen to alloy). The activation temperature of the oxygen-poisoned sample is ∼100 K higher than the value of the un-poisoned one. With the help of ion etching, it is found the thickness of the passivated surface layer of the oxygen-poisoned sample was ∼58 nm. However, the thickness of the passivated surface layer of the un-poisoned sample is only ∼36 nm. That is the reason why the oxygen-poisoned sample cannot renew the hydrogen absorption capacity under the same regeneration conditions as in the un-poisoned one. © 2011 Elsevier B.V. All rights reserved.