Discussion on calculation depth selection of equivalent shear wave velocity for site classification in urban area of Suzhou

Jiyan ZHAN,Guoxing CHEN,Jianda LIU

DOI: https://doi.org/10.13197/j.eeev.2012.05.023

2012-01-01

Abstract:In view of the question whether or not increasing the soil depth from 20 m to 30 m in calculating equivalent shear wave velocity for site classification is controversial, shear wave velocity data of 143 drilling holes from urban area of Suzhou are analyzed. By comparing site classification standards between GB50011-2010 code for seismic design of buildings and American and European seismic regulations, the differences of equivalent shear wave velocity calculated with the depth of 20 m and 30 m are discussed. The results show that shear wave velocity has much higher variability for soil depth of 20 ∼ 60 m, the relationship between shear wave velocity and soil depth is fitting with piecewise linear function and power function. The sample values of equivalent shear wave velocity for site class III is more close to the lower boundary value of site class III. When the calculation depth increases from 20m to 30m, the mean values of equivalent shear wave velocity for the site class III will increase 16%. Following the boundary values of site classification of American and European seismic regulation will improve classification standard for the sites in urban area of Suzhou integrally. If the calculation depth is increased to 30 m, it would be more appropriate to use 170 m/s as the boundary value of the site class III and site class IV.