Abstract:PurposeThe micro-vibrations of some flexible appendages onboard satellite such as reaction wheels, scanning mechanisms etc, will severely influenced the optical precision of the imager. To guarantee the imager orientation accuracy of high resolution satellite, this study focused on designing an isolation system to attenuate the influences of on orbit micro-vibration.MethodsStwart configuration is employed to construct the reaction wheel isolation system which contains six single isolators. A launch environment damper is designed to guarantee the structure safety of isolators without lock mechanisms at launching term which simplify the whole isolation system. The imager isolation system is composed of three special springs which are placed between imager basement and roof board of the satellite to isolate the disturbances to the imager. Both isolation systems are compose together for the satellite to attenuate the influences of on orbit micro-vibration.ResultsExperiments are designed to validate the productivity of the micro-vibration isolation system both in component and satellite level. The sine vibration experiment results show that the maximal acceleration output 34.61g is much lower than the flywheel design value 49g which guarantees the safety of flywheel under harsh launch environment. The experiment results in satellite level show that the vibration output in three directions changes smoothly and the imager orientation accuracy is 10.89urad (3σdocumentclass[12pt]{minimal}usepackage{amsmath}usepackage{wasysym}usepackage{amsfonts}usepackage{amssymb}usepackage{amsbsy}usepackage{mathrsfs}usepackage{upgreek}setlength{oddsidemargin}{-69pt}egin{document}$$3sigma$$end{document}) which is suitable for the requirement of the imager onboard the SDLT-1 satellite.ConclusionThe proposed method has been applied to the SDLT-1 satellite and the experiment results in component and satellite level show the feasibility of the method. Some satellite with rigorous micro-vibration requirement could employ the proposed method of this study.

Integrated Design of Space Telescope Vibration Isolation and Attitude Control

An Event-triggered Design Scheme for Spacecraft Attitude Control

Micro-vibration control of spaceborne payload with smart parallel struts

Attitude Control For Flexible Spacecraft With Swinging Components

Dynamic Analysis and Vibration Control of Space Towing Tethered-combination

System Integration and Control Design of a Maglev Platform for Space Vibration Isolation

Design of a Maglev Stewart Platform for the Microgravity Vibration Isolation

Analytical Study of Whole Flexible Spacecraft Vibration Isolation

Decoupling design and control of a spaceborne ultra–stable platform for vibration isolation and precise steering

Method of high precision pointing control for spacecraft system based on the active-passive integrated orthogonal micro-vibration isolation platform

Study on Micro-vibration Isolation System Design and Validation for the SDLT-1 Satellite of China

Modeling and Control of a Six Degrees of Freedom Maglev Vibration Isolation System

Active Vibration Control of a Large Space Telescope Based On H∞ Control With Unilateral and Constrained Input

Modeling and Analysis of Bio-Inspired, Reconfigurable, Piezo-Driven Vibration Isolator for Spacecraft

Knowledge-based integrated optimization design of agile imaging satellites? attitude controller and vibration isolator

Design Of An Active Low Frequency Vibration Isolation System For Atom Interferometry By Using Sliding Mode Control

Design and Experimental Study of a Hybrid Micro-Vibration Isolation System Based on a Strain Sensor for High-Precision Space Payloads

Active Vibration Isolation optimal Control for Manned Spacecraft based on Active Disturbance Rejection Control

1C31 Performance Evaluation of Whole-spacecraft Vibration Isolation(The 12th International Conference on Motion and Vibration Control)

Experimental modeling and optimization of single-gimbal CMG vibration isolator

Simultaneous Decoupling Control of Translation and Rotation for a 6-DOF Vibration Isolator Based on the Stewart Platform