Abstract:The importance of rate on the mechanical properties of rocks has been widely acknowledged by numerous scholars. Currently, most researchers mainly focus on investigating the influence of loading rate, while there is limited research on the effects of fracture growth rate on mechanical properties such as fracture process zone (FPZ) and fracture toughness of rocks. In order to explore the impact of fracture growth rate on the mechanical properties of rocks, this study conducted three-point bending pure I-mode fracture experiments on salt rocks at temperatures ranging from ambient to 700 °C using different quasi-static loading rates (0.02–2 mm/min). Meanwhile, digital image correlation (DIC) technology was employed to monitor displacement and strain variations, identify and calculate the fracture growth rate and FPZ size, and subsequently compute the corrected fracture toughness. The study discussed the effects of temperature and fracture growth rate on the FPZ and fracture toughness of rocks. The following main conclusions are drawn based on the analyzed results: (1) Temperature and loading rate have a great influence on the onset of FPZ in salt rocks. The higher the temperature and loading rate, the earlier the onset of FPZ. (2) With the increase of the average fracture growth rate, the FPZ length at the peak load of rock salt and the modified fracture toughness increased continuously, and was divided into two stages, in the stage of the crack extension rate generated by the loading rate of 0.02 mm/min-1 mm/min grew faster, and the growth of the crack extension rate generated by the loading rate of more than 1 mm/min became slower. (3) The effect of temperature on the fracture parameters of rock salt is significant, the peak load moment FPZ length and fracture toughness first increase and then slowly decrease with increasing temperature from room temperature to 700°C. The inflection point is at 500°C, where the fracture toughness and FPZ length reach the maximum value. (4) As the loading rate increases the proportion of transgranular fracture in the rock salt fracture surface gradually rises, and the crack extension path becomes smoother and smoother.

Experimental study of temperature effect on fatigue property of salt rock

Experimental investigation and damage modeling of salt rock subjected to fatigue loading

Time Interval Effect in Triaxial Discontinuous Cyclic Compression Tests and Simulations for the Residual Stress in Rock Salt

Mechanical properties and damage constitutive model for uniaxial compression of salt rock at different loading rates

Fatigue Mechanical Properties of Salt Rocks Under High Stress Plateaus: The Interaction Between Creep and Fatigue

Creep-fatigue characteristics of rock salt under different loading paths

The Influence of Temperatures on the Mechanical Properties and Fracture Behavior of Rocks under Mixed Mode I/II Loading

The effect of fracture growth rate on the fracture process zone of salt rock after heat treatment

A Micromechanical-Based Failure Criterion for Rocks after High-Temperature Treatment

Uniaxial compression tests on red sandstone specimens after different high-temperature processing and cooling time

Mechanical Properties of Limestone After High-Temperature Treatment Under Triaxial Cyclic Loading and Unloading Conditions

Rock Salt Under Cyclic Loading with High-Stress Intervals

Experimental study on creep properties of salt rock under long-period cyclic loading

Damage Evolution and Deformation of Rock Salt Under Creep-Fatigue Loading

Creep properties and damage constitutive model of salt rock under uniaxial compression

Effects of high temperature on the mechanical behaviors of sandstone under true-triaxial unloading conditions

A New Testing Method for the Characterization of the Tension-Compression Cyclic Behavior of Rock Salt

Experimental research on damage characteristics of red sandstone under the combined action of temperature, water and stress

Analysis of damage characteristics and energy evolution of salt rock under triaxial cyclic loading and unloading

Experimental study on the variation of physical and mechanical of rock after high temperature treatment

Mechanical characteristics and permeability evolution of salt rock under thermal-hydro-mechanical (THM) coupling condition