Abstract:The soil–anchor interface mechanical behavior is of practical importance for the bearing performance of ground anchors. Element-scale pullout test is a simple, reliable, and economical technique to investigate the interface shear stress–displacement response of anchors. However, the influence range of boundary effect for the anchoring element-scale pullout specimens is poorly understood, particularly under the actual stress and construction conditions. In addition, there is still a lack of study on the mechanical behavior of soil–anchor interface subjected to ground pressure via element-scale pullout test. In this paper, an element-scale pullout test setup that can simulate ground pressure and construction method of ground anchors was specially developed, with details introduced carefully. A response surface function-based soil dry density prediction model was proposed for the test design. Comparison with the soil consolidation test results indicates that this model equipped with high fitting and prediction accuracy. Twenty groups of element-scale pullout tests with different ground pressures and anchor diameters were conducted. Based on the test design of the proposed model, the soil density and moisture content were almost the same for all specimens after consolidation. The shrinkage of anchor hole, interface shear stress–displacement response, and interface shear strength were discussed adequately. It is shown that the soil–anchor interface shear strength is hardly dependent on ground pressure under the actual construction method of anchors. The influence of boundary effect for the element-scale pullout test can almost be eliminated when diameter ratio of specimen to anchor exceeds 5.0 ~ 6.7.

Analysis of anchorage characteristics and parameter influence of soil imperfect anchor

Analysis of the pseudo-cohesion for the soil-nailed retaining structure

Centrifuge Modelling of Suction Anchor Subjected to Inclined Load in Soft Clay

Review on Seabed Trenches Induced by Mooring Lines and Analyses of Anchor Bearing Capacity

Behavoir Of Installation For Suction Anchor In Soft Clay

Experimental and Data-Driven Prediction for the Impact of Free/bond Lengths of Element Specimen on Interface Characterization of Ground Anchors

Three-dimensional Interaction Between Anchor Chain and Seabed

Inclined Loading Capacity of Caisson Anchor in South China Sea Carbonate Sand Considering the Seabed Soil Loss

Monotonic Uplift Behavior of Anchored Pier Foundations in Soil Overlying Rock

Numerical Investigations on Pore-Pressure Response of Suction Anchors under Cyclic Tensile Loadings

Element-scale pullout test study on the mechanical behavior of grouted anchor–soil interface subjected to ground pressure

INFLUENCE OF ANCHORAGE DEPTH ON MECHANICAL BEHAVIOUR OF DOUBLE-ROW ANTI-SLIDE PILES

Analytical Method for Interfacial Slip Failure Processes Based on UFL Bond-Slip Model: Study of Grout/Soil Anchorage Interfaces in Earthen Sites

Numerical modelling on anchor-soil-water interaction for dynamic installation of gravity installed anchors

Mechanical Behaviour of Anchored Rock Containing Weak Interlayer under Uniaxial Compression: Laboratory Test and Coupled DEM–FEM Simulation

Quasi-static Three-Dimensional Analysis of Suction Anchor Mooring System

The Interface Friction Effect

Numerical Study of Quasi-Static to Dynamic Pullout Capacity of Anchors in Sand

Interface stress relaxation behavior of grouted anchors in red clay: experimental study and a disturbed state concept-based theoretical model

Micro-Numerical Simulation of Anchorage Performance for Geotechnical Anchored Structure by Particle Flow Code

Numerical study on uplift capacity and behavior of plate anchor considering different dilation angles