Abstract:To reveal the deformation mechanism during tunneling in deep soft ground, triaxial unloading confining pressure tests and triaxial unloading creep tests were carried out on sandy mudstone specimens to study the dilatancy and fracturing behavior of soft rock. In the triaxial unloading confining pressure tests, the stress path and different unloading rates were considered to reflect the unloading characteristics of the excavation methods. The unloading rate effects and the rock damage evolution law are studied. The following conclusions are obtained from the results. Firstly, when the unloading rate is smooth, the peak strengths and deviatoric stress–strain curves under the unloading condition are close to those under the conventional loading condition. Secondly, the post-peak brittle characteristics are more apparent with the increasing unloading rates. Thirdly, the soft rock undergoes five deformation and failure regimes of elasticity, pre-peak unloading damage–dilatancy, post-peak brittle drop, linear strain softening and residual perfect plasticity under quasi-static smooth unloading of mechanized excavation which is mainly focused on in this study. Fourthly, the damage evolution law at the pre-peak damage–dilatancy stage follows an exponential function. Fifthly, during the post-peak stages, multistage microfractures are initiated, propagated and finally coalesced forming a shear-fragmentation band with a certain thickness, accompanied by significant volumetric dilatancy. In the triaxial unloading creep tests, multistep unloading of the confining pressure was applied, while the axial pressure was kept constant. The results show that when the deviatoric stress is larger and the experienced creep time is longer, the unloading effect and creep characteristics become more apparent accompanied with obvious lateral dilatancy, eventually leading to significant creep–dilatancy. The progressive failure with time is caused by the damage accumulating with time-dependent crack expansion, which can be called as ‘time-dependent damage and fracturing’. The reasons for the above evolution process are presented, then the deformation mechanism of soft rock is revealed. The soft rock deformation mainly consists of two parts. One part is the pre-peak damage–dilatancy and post-peak fracture–bulking produced at the excavation unloading instant. The other part is creep–dilatancy caused by time-dependent damage and fracturing in a period of time after excavation. The above-mentioned results of damage, dilatancy and fractures evolution process are in good agreement with the in situ monitoring results and previous studies about the surrounding rock convergence, fracturing and EDZ (excavation damaged zone) development.

Study of Mechanical Parameters Deterioration Laws of Rock Mass in Mining Unloading

Spatial Variability and Time Decay of Rock Mass Mechanical Parameters: A Landslide Study in the Dagushan Open-Pit Mine

A path for evaluating the mechanical response of rock masses based on deep mining-induced microseismic data: A case study

Effect of Confining Pressure Unloading Rate on Mechanical and Energy Characteristics of Coal-Rock Combinations

Effect of Loading Rate on the Mechanical Properties of Weakly Cemented Sandstone

Mining-induced static and dynamic loading rate effect on rock damage and acoustic emission characteristic under uniaxial compression

Failure characteristics induced by unloading disturbance and corresponding mechanical mechanism of the coal-seam floor in deep mining

Mechanical Response and Failure Characteristics of Granite under Unloading Conditions and Its Engineering Application

Experimental study on the interrelation of multiple mechanical parameters in overburden rock caving process during coal mining in longwall panel

Evolution Laws of Stress–Energy and Progressive Damage Mechanisms of Surrounding Rock Induced by Mining Disturbance

Acoustic emission characteristics and fracture mechanism of sandstone in open-pit mines under different types of cyclic loads

Study on the Weakening Law and Classification of Rock Mass Damage under Blasting Conditions

Failure mechanism and stability analysis of an open-pit slope under excavation unloading conditions

Mechanical Properties and Failure Mechanism of Anchored Bedding Rock Material under Impact Loading

Experimental mechanical strength and deformation characteristics of deep damaged–fractured rock

Mechanical Properties and Failure Mechanism of the Weakly Cemented Overburden in Deep Mining

Experimental Study on the Dilatancy and Fracturing Behavior of Soft Rock Under Unloading Conditions

Failure characteristics and fracture mechanism of overburden rock induced by mining: A case study in China

Discrete Element Simulation Analysis of the Bending and Toppling Failure Mechanisms of High Rock Slopes

Evolution Characteristics of Overburden Instability and Failure under Deep Complex Mining Conditions

Mechanical behaviors and failure characteristics of coal-rock combination under quasi-static and dynamic disturbance loading: a case based on a new equipment