Abstract:Common analytical assessment methods for concrete dams are unlikely to predict material fracture in the dam body because of the assumption of rigid body behavior and uniform- or linear stress distribution along a predetermined failure surface. Hence, probabilistic non-linear finite element analysis, calibrated from scale model tests, was implemented in this study to investigate the impact of concrete material parameters (modulus of elasticity, tensile strength, compressive strength, fracture energy) on the ultimate capacity of scaled model dams. The investigated dam section has two types of large asperities, located near the downstream and/or upstream end of the rock–concrete interface. These large-scale asperities significantly increased the interface roughness. Post-processing of the numerical simulations showed interlocking between the buttress and the downstream asperity leading to fracture of the buttress with the capacity being determined mainly by the tensile strength of the buttress material. The capacity of a model with an asperity near the upstream side, with lower inclination, was less dependent on the material parameters of the buttress as failure occurred by sliding along the interface, even with inferior material parameters. Results of this study show that material parameters of the concrete in a dam body can govern the load capacity of the dam granted that significant geometrical variations in the rock–concrete interface exists. The material parameters of the dam body and their impact on the capacity with respect to the failure mechanism that developed for some of the studied models are not commonly considered to be decisive for the load capacity. Also, no analytical assessment method for this type of failure exists. This implies that common assessment methods may misjudge the capacity and important parameters for certain failure types that may develop in dams.

Structure Analysis for Concrete‐faced Rockfill Dams Based on Information Entropy Theory and Finite Element Method

Stochastic Finite Element Analysis for Fuzzy Probability of Embankment System Failure by First-Order Approximation Theorem

Two-dimensional DEM-FEM coupling analysis of seismic failure and anti-seismic measures for concrete faced rockfill dam

Numerical modeling of soil–structure interface of a concrete-faced rockfill dam

Concrete structure durability assessment based on grey relative degree & fuzzy recognition

Reliability Analysis of High Concrete-Face Rockfill Dams and Study of Seismic Performance of Earthquake-Resistant Measures Based on Stochastic Dynamic Analysis

Three‐dimensional Numerical Analysis of Concrete‐faced Rockfill Dam Using Dual‐mortar Finite Element Method with Mixed Tangential Contact Constraints

Stress-deformation analysis of a concrete-faced rockfill dam on thick overburden layers

Time-Dependent Fuzzy Reliability Analysis of Concrete Slab during the Initial Water Storage Period of CFRD: A Case Study

The simulation of high compressive stress and extrusion phenomenon for concrete face slabs in CFRDs under strong seismic loads

Failure and Overall Stability Analysis on High Arch Dam Based on DFPA Code

Three-dimensional Seismic Response Analysis of a Concrete-Faced Rockfill Dam on Overburden Layers

Stochastic dynamic response and seismic fragility analysis for high concrete face rockfill dams considering earthquake and parameter uncertainties

A scaled boundary finite element method procedure for arch dam-water-foundation rock interaction in complex layered half-space

Evaluation Standard for Safety Coefficient of Roller Compacted Concrete Dam Based on Finite Element Method

Probabilistic finite element analysis of failures in concrete dams with large asperities in the rock–concrete interface

A Finite Element Approach for Seismic Design of Arch Dam-Abutment Structures

Element-free Method for Stress-Strain Analysis of Concrete Face Rock Fill Dam

A novel constitutive model for the concrete face slab of a CFRD and the numerical simulation of its seismic behavior

Dynamic Response Analysis of CFRD with Extrusion-Sidewall Structure

Static and Dynamic Analyses of High Core Rockfill Dams