Abstract:Manganese oxides and carbon materials are both desirable catalysts for persulfate (PS) advanced oxidation processes in environmental remediation. Nevertheless, manganese oxides suffer from low reusability while carbon materials face the problem of limited catalytic efficiency. For the purpose of making full use of the advantages of the two materials as well as avoiding their shortcomings, carbon-coated Mn3O4 composites (Mn3O4/C) with a regular nanocube structure were designed to activate PS for the removal of organics, and the catalytic processes were deeply investigated. The catalyst prepared at 400 °C with a precursor ratio (glucose/KMnO4) of 0.5 exhibited the best catalytic performance along with satisfactory reusability owing to the protection of the outer carbon layer. According to experimental results and density functional theory calculation, there were van der Waals interaction and a part of the strong attraction between the interface of PS and Mn3O4/C, which could be enhanced by inner Mn3O4 and thus promoted the electron transfer between PS and carbon shell, and the defective edges of the carbon layer with hydroxyl (C–OH) groups could act as active sites for PS activation. Radical (SO4•–, •OH) and nonradical (1O2) oxidation processes both participated in the degradation of 2,4-dichlorophenol, in which •OH was dominating. This study not only proposed a promising catalyst for the degradation of pollutants but also expanded research ideas for future PS activation mechanism studies by integrating the experiment and simulation.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c04049?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c04049</a>.Experimental detection method and pseudo-first-order kinetics fitting model; XRD, SEM, nitrogen adsorption–desorption isotherms, FTIR spectrum, and XPS survey of the catalyst; TOC changes of 2,4-D; pseudo first-order kinetics fitting of the reaction; effects of PS and catalyst dosage; zeta potentials of 0.5-Mn3O4/C-T4; linear correlation results between pH and kobs; dynamic changes of solution pH with the low PS concentration; molecular structure of pollutants; degradation of 2,4-D by different carbon materials; cyclic voltammograms; optimized structures of models for DFT calculation; RDG isosurfaces of COH/PS; effects of MeOH and TBA on 2,4-D removal efficiency; decomposition of PS in the presence of NaN3; pore structure parameters of materials; and distance, bond length, and Bader charge in different structures (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c04049/suppl_file/cs0c04049_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Boosted Persulfate Activation Using Ba2CoMnO5 and LDH/CaCO3 for Amoxicillin Degradation: A Comparative Study

Heterogeneous Activation of Peroxymonosulfate Using Ordered Mesoporous Co 3 O 4 for the Degradation of Chloramphenicol at Neutral Ph

Stable Incorporation of MnOx Quantum Dots into N-doped Hollow Carbon: A Synergistic Peroxymonosulfate Activator for Enhanced Removal of Bisphenol A

Activation of Peroxymonosulfate by CoS2 Loaded Air-Laid Cloth for Rapid Degradation of Organic Pollutants in a Shallow Continuous Flow Reactor

Oxygen-defective MnO2−x Rattle-Type Microspheres Mediated Singlet Oxygen Oxidation of Organics by Peroxymonosulfate Activation

Enhanced Activation of Peroxymonosulfate with Metal-Substituted Hollow MxCo3-xS4 Polyhedrons for Superfast Degradation of Sulfamethazine

Modified layered double hydroxides by using Fe-rich porous biochar derived from petrochemical wastewater sludge for enhancing heterogeneous activation of peroxymonosulfate towards chloramphenicol degradation

In situ synthesis of CoFe-LDH on biochar for peroxymonosulfate activation toward sulfamethoxazole degradation: Cooperation of radical and non-radical pathways

Heterogeneous activation of persulfate by activated carbon supported iron for efficient amoxicillin degradation

Origin of the Enhanced Reusability and Electron Transfer of the Carbon-Coated Mn 3 O 4 Nanocube for Persulfate Activation

Graphitized Carbon Encapsulated Co Anode Electrochemically Activating Persulfate for Sulfamethoxazole Degradation

Modulating the Electron Structure of Co-3d in Co3O4-x/WO2.72 for Boosting Peroxymonosulfate Activation and Degradation of Sulfamerazine: Roles of High-Valence W and Rich Oxygen Vacancies.

Effective removal of antibiotics from water by Cu2O/Co3O4-catalyzed peroxymonosulfate oxidation: catalytic performance and degradation mechanism

Utilization of stable and efficient perovskite La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3-δ catalyst with high-entropy to boost peroxymonosulfate activation towards organics degradation

High Efficient Activation of Peroxymonosulfate by Co <sub>9</sub>s <sub>8</sub> Anchored in N, S, O Co-Doped Carbon Composite for Degradation of Sulfamethoxazole: Role of Sulfur Precursor and Sulfur Doping Content

New insight into peroxymonosulfate activation by CoAl-LDH derived CoOOH: Oxygen vacancies rather than Co species redox pairs induced process

Synergistic activation of peroxymonosulfate via oxygen vacancy-rich CoxMn3-xO4/montmorillonite catalyst for environmental remediation

Enhanced activation of peroxymonosulfate with cobalt-doped manganese-iron oxides for contaminant degradation: Regulation of oxygen vacancy defects

Enhancing degradation of sulfamethoxazole by layered double hydroxide/carbon nanotubes catalyst via synergistic effect of photocatalysis/persulfate activation

High Efficient Activation of Peroxymonosulfate by Co9S8 Anchored in N, S, O Co-Doped Carbon Composite for Degradation of Sulfamethoxazole: Effect of Sulfur Precursor and Sulfur Doping Content

ZrO2 supported perovskite activation of peroxymonosulfate for sulfamethoxazole removal from aqueous solution