Abstract:In recent years, the types and quantities of polyurethane products have increased day by day. However, traditional petroleum-based water-based polyurethanes not only have the problem of difficult waste disposal, but also accelerate the depletion of petroleum materials. Herein, an eco-friendly polymer was successfully prepared by introducing tannic acid (TA) into castor oil-based waterborne polyurethane (WPU). The effects of the incorporation of TA, a bio-based material, on the particle size of the resulting polyurethane (PU) dispersion, and the thermal performance, mechanical properties, and hydrophobicity of PU membranes were systematically investigated. Finally, ATR-FTIR and SEM of cured films after degradation were measured to characterize the degradation ability of the membranes. It was found that the tensile strength of the samples is improved from 12.67 to 19.57 MPa with the TA content increasing from 0 to 1.5%, nevertheless their elongation at break declines from 306.51 to 237.12%. A noteworthy increase in the glass transition temperature (Tg) was exhibited by using DSC and DMA for the resulting PU films with increasing the TA content. Besides, the improvement in the water absorption of the blend films decreases from 14.5 to 10.2% according to the advantage of TA increasing the degree of cross-linking of the system. After 120 days of degradation, it can be seen that the urethane bond and the aliphatic ester bond played a vital role in the degradation process through the infrared of the degraded films. At the same time, the introduction of TA improves the degradation performance of WPU films. What is more, the application of WPU dispersions containing tannins on the leather surface shows excellent comprehensive performance, which means that WPU dispersions have potential applications as leather finishing agents. This work takes advantage of two kinds of bio-based materials, the mass of bio-based materials accounts for 57% of the total mass, which not only shortens the utilization of petroleum resources, but also effectively resolved the problem that poor quality of castor oil-based WPU and traditional waste is difficult to degrade, improving the commercial value of castor oil-based PU.

A sustainable waterborne vanillin–eugenol–acrylate miniemulsion with suitable antibacterial properties as a substitute for the styrene–acrylate emulsion

Bio-based Waterborne Poly(Vanillin-Butyl Acrylate)/MXene Coatings for Leather with Desired Warmth Retention and Antibacterial Properties

Preparation and properties of antibacterial styrene‐acrylic emulsion based on bis‐quaternary ammonium salt‐containing mono‐methacrylates as polymerizable antibacterial agents

Preparation and properties of antibacterial styrene-acrylic emulsion containing thiazole structure and its application as coating

Development of Novel Polymerizable Antibacterial Monomer and Its Antibacterial Effects on Dental Adhesive

Structural design and preparation of pigment/resin integrated ultra-stable antibacterial composite particles

Effect of Different Emulsifiers on the Preparation Process of Aloe-Emodin Microcapsules and Waterborne Coating Properties

Fabrication of water-resistance and durable antimicrobial adhesion polyurethane coating containing weakly amphiphilic poly(isobornyl acrylate) Side chains

Efficient Preparation and Antibacterial Activity of Limonene-Based Terpolymer Particles with Controllable Composition and Size Via Self-Stabilized Precipitation Polymerization

Sustainable castor oil-based vitrimers: Towards new materials with reprocessability, self-healing, degradable and UV-blocking characteristics

Preparation of degradable castor oil-based waterborne polyurethane with tannic acid as crosslinking agent and its application on leather surface coating

Lignin-Polylactide Reverse Emulsions for Water and UV-Resistant Composite Films

A zwitterionic terpolymer based coating potentially for antibacterial and antifouling applications

A novel eco-friendly imidazole ionic liquids based amphoteric polymers for high performance fatliquoring in chromium-free tanned leather production

Modification of styrene-acrylic emulsion by organic UV absorber in synergy with fluorine and silicon monomers for weatherable coatings

Facilely Promoting the Concentration of Baicalin in Polylactic Acid Fiber for UV Shielding and Antibacterial Functions: A Customized and Sustainable Approach

Synthesis of Acrylate Modified by Polysiloxane Core-shell Emulsion for Leather Finishing

Development of Sustainable Citric Acid-Based Polyol To Synthesize Waterborne Polyurethane for Antibacterial and Breathable Waterproof Coating of Cotton Fabric

An eco‐friendly and high shear strength adhesive from catechol‐modified polyethyleneimine

Synthesis of Poly(maleic Anhydride-Co-vinyl Chloride) Crosslinked Microspheres and Its Superior Enhancement in Mechanical Strength and Antibacterial Activity for Poly(vinyl Alcohol) Composite Films

Novel Internal Emulsifiers for High Biocontent Sustainable Pressure Sensitive Adhesives