Highly-Sensitive Polymer Optical Fiber SPR Sensor for Fast Immunoassay

Ying Wang,Xing Rao,Xun Wu,George Y. Chen,Changrui Liao,Mateusz Jakub Smietana,Yiping Wang

DOI: https://doi.org/10.1007/s13320-024-0729-x

IF: 2.814

2024-05-28

Photonic Sensors

Abstract:A new type of human immunoglobulin G (IgG) sensors based on the surface plasmon resonance (SPR) in the low refractive index (RI) plastic optical fiber (POF) and an antibody immobilization method is presented. A 50-nm-thick gold film was formed on the polished D-shaped fiber surface by magnetron sputtering. The RI response of the POF sensor is 30 049.61 nm/RIU, which is 26.5 times higher than that of single mode fiber (SMF) SPR sensors. The proposed SPR biosensor can be developed by simple and rapid modification of the gold film with 11-mercapto undecanoic acid (MUA). Upon immobilization of the goat anti-human IgG antibody, the resonance wavelength shifts by 11.2 nm. The sensor can be used to specifically detect and quantify the human IgG at concentrations down to 245.4 ng/mL with the sensitivity of 1.327 7 nm per μg/mL, which offers an enhancement of 12.5-fold compared to that of the conventional SMF based SPR sensors. The proposed device may find the potential applications in the case of use at the point of care.

optics,instruments & instrumentation

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop a highly sensitive polymer optical fiber surface plasmon resonance (SPR) sensor for rapid immunoassays, especially for the detection of human immunoglobulin G (IgG). Specifically, the objectives of the paper include:

1. **Improve the sensitivity of the sensor**: By using a polymer optical fiber (POF) with a low refractive index (RI), the refractive index response sensitivity is significantly improved compared with the traditional single - mode fiber (SMF) SPR sensor. The sensitivity reported in the paper is 30,049.61 nm/RIU, which is 26.5 times higher than that of the traditional SMF sensor.

2. **Simplify the manufacturing process**: A simple and low - cost manufacturing method is proposed. A 50 - nanometer - thick gold film is formed on the surface of the D - shaped optical fiber by magnetron sputtering, and 11 - mercaptoundecanoic acid (MUA) is used for antibody immobilization.

3. **Achieve rapid and specific IgG detection**: The sensor can specifically detect and quantify human IgG, with a minimum detection limit (LoD) of 245.4 ng/mL and a sensitivity of 1.3277 nm/μg/mL, which is 12.5 times higher than that of the traditional SMF sensor.

4. **Improve the stability and reusability of the sensor**: By soaking and cleaning with piranha solution, the sensor can be reused multiple times, showing good stability and regeneration ability.

In summary, this paper aims to develop a high - performance, low - cost and easy - to - manufacture SPR sensor for rapid and accurate detection of human IgG, which has potential clinical application prospects, especially in point - of - care scenarios.