Role of metal inserts for ‘targeted’, ‘uniform’ or ‘controlled’ microwave heating objectives involving generalized sets of dielectrics (Group 1 – 4)

Madhuchhanda Bhattacharya,Tanmay Basak

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2023.125133

IF: 5.2

2024-05-01

International Journal of Heat and Mass Transfer

Abstract:Microwave heating occurs volumetrically leading to faster processing than conventional heating processes. Over the last few decades, the potential of microwave heating has been investigated for various thermal processing applications such as food processing, material synthesis, fuel production and waste treatment/remediation. Current work investigates the role of the metal inserts towards targeted, uniform and/or controlled microwave heating for the four groups of dielectrics (Group 1 – 4) involving lateral and isotropic microwave incidences. The microwave induced heat generation and evolving temperature distributions within the materials in the absence and presence of the metal insert are numerically determined via the mathematical models comprising of Helmholtz equation, energy balance equation and an integro-differential boundary condition representing the scattering of the microwave at the air-material interface. Galerkin finite element method with biquadratic elements along with Crank-Nicolson time integration scheme has been employed to solve the governing equations. It has been found that the metal insert can suitably alter the heating characteristics leading to either faster heating, better heating uniformity or more intense targeted heating of the materials. Uniform microwave heating is generally difficult to attain except for very small samples. This work shows that the metal inserts can significantly reduce the heating inhomogeneity of the moderately large samples involving Group 1 to Group 3 materials. In addition, the targeted heating effect of the materials (Groups 1 to 4) can also be intensified by the use of the metal insert, as has been illustrated for various test cases. Especially, the metal insert can lead to targeted heating at the incident surface irrespective of the material or sample dimension, and that is difficult to attain except for the large samples. The metal inserts are also found to be efficient to control the rapid microwave heating experienced by the small samples of lossy materials (Group 1 and 3 materials) or accelerate the slower heating of the large samples resulting in significant energy savings, especially for Group 1 to Group 3 materials.

engineering, mechanical,thermodynamics,mechanics