Abstract:Bistable mechanisms have two stable positions and their characteristic analysis is much harder than the traditional spring system due to their postbuckling behaviour. As the strong nonlinearity induced by the postbuckling, it is difficult to establish a correct model to reveal the comprehensive nonlinear characteristics. This paper deals with the in-plane comprehensive static analysis of a translational bistable mechanism using nonlinear finite element analysis. The bistable mechanism consists of a pair of fixed-clamped inclined beams in symmetrical arrangement, which is a monolithic design and works within the elastic deformation domain. The displacement-controlled finite element analysis method using Strand7 is first discussed. Then the force–displacement relation of the bistable mechanism along the primary motion direction is described followed by the detailed primary translational analysis for different parameters. A simple analytical (empirical) equation for estimating the negative stiffness is obtained, and experimental testing is performed for a case study. It is concluded that (a) the negative stiffness magnitude has no influence from the inclined angle, but is proportional to the product of the Young’s modulus, beam depth, and cubic ratio for in-plane thickness to the beam length; (b) the unstable position is proportional to the product of the beam length and the Sine function of the inclined angle, and is not affected by the in-plane thickness and the material (or the out-of-plane thickness). The in-plane off-axis (translational and rotational) stiffness is further analysed to show the stiffness changes over the primary motion and the off-axis motion, and a negative rotational stiffness domain has been obtained.

A non-transit fully compliant tristable mechanism capable of direct switching between every two stable positions

A design approach to fully compliant multistable mechanisms employing a single bistable mechanism

Multi-Stable Tensegrity Structures

Fully compliant bistable mechanisms with enhanced pitch stiffness

A monolithic tunable symmetric bistable mechanism

Design and optimization of compliant constant-torque mechanisms utilizing arbitrary pre-curved beams

A bistable mechanism with linear negative stiffness and large in-plane lateral stiffness: design, modeling and case studies

Design, Analysis, Experimentation, and Control of a Partially Compliant Bistable Mechanism

Integrated Development of a Topology-Optimized Compliant Mechanism for Precise Positioning

A Novel Deployable Truss Grasping Manipulator with Adjustable Knuckle Length and Bilateral Curvature

Intrinsically Multi-Stable Spatial Linkages

A Single-Input State-Switching Building Block Harnessing Internal Instabilities

Theoretical Modeling of Attenuated Displacement Amplification for Multistage Compliant Mechanism and Its Application

Task-driven geometric synthesis method of a bistable compliant mechanism for the rigid guidance problem

Design and Testing of a Novel Nested, Compliant, Constant-Force Mechanism with Millimeter-Scale Strokes

Achieving high-quality and large-stroke constant torque by axial force release

Development of a Multistage Compliant Mechanism with New Boundary Constraint

On the comprehensive static characteristic analysis of a translational bistable mechanism

Isogeometric topology optimization of compliant mechanisms using transformable triangular mesh (TTM) algorithm

A new triangular multistable structure composed of transition element and deformation elements