Abstract:Chemical looping combustion (CLC) is a novel technology with inherent CO2 capture, especially for solid fuels. The existence of ash in solid fuels is one major challenge for CLC technology development. In this work, interaction between an iron-based oxygen carrier and four different types of coal ash was studied in a laboratory-scale fluidized reactor. Different factors - the ash component, the redox cycle number, and the ash size - were taken into account. Chemical composition of the ash had effect on the reduction time from Fe2O3 to Fe3O4 in the fluidized bed. The presence of reactive components (such as Fe2O3 and CaSO4) in the ash, functioning as oxygen carriers, extended the reduction time. However, the chemical combination between the ash contents and the carrier can shorten the reduction time. The effect of ash on the carrier's reactivity depended on the ash type. Most ashes decreased the reactivity of the carrier, except the ash mainly composed of CaSO4 which showed an increased reactivity due to the deposited reactive CaSO4. The effect of ash on decreasing the carrier's reactivity increased with the cycles. Meanwhile, the larger ash (900-1000 mu m) corresponded to a higher CO conversion, and thus had less effect on the reactivity than the smaller ash (300-400 mu m). This occurrence can be attributed to the non-uniform solid-solid contact between the larger ash and the carrier. Sintering and agglomeration of the carrier particles occurred in the existence of most ashes, except the lignite ash enriched in CaO. Ash deposition and the formation of new compounds were detected. One common compound formed in the presence of SiO2-rich ash was Fe2SiO4, which has a low melt point (1170 degrees C) and a low thermal conductivity with a greater adhesion. The physical ash deposition and the formation of Fe2SiO4 through chemical reactions were proposed to be the main reasons for the effect of ash on the carrier's reactivity and the occurrence of sintering and agglomeration. The existence of ash not only has impact on the carrier's reactivity, but also causes solid fluidization disturbances. More effort is deserved to put into the ash-related issue in solid fuel CLC. (C) 2013 Elsevier Ltd. All rights reserved.

Crack propagation and attrition mechanism of oxygen carriers in chemical looping process

Attrition and attrition-resistance of oxygen carrier in chemical looping process – A comprehensive review

Water vapor effects on attrition and elemental migration of iron‐based oxygen carrier in chemical looping combustion

Improving attrition resistance of oxygen carriers by biomass ash in chemical looping process

Lattice oxygen migration of iron-based oxygen carrier during chemical looping reaction process

High-Temperature Attrition of Nano CaO-Based CO2-Reactive Adsorbents in the Calcium Looping Process

Insights into the Relationship Between Microstructural Evolution and Deactivation of Al2O3 Supported Fe2O3 Oxygen Carrier in Chemical Looping Combustion

Understanding the structural changes on Fe2O3/Al2O3 oxygen carriers under chemical looping gasification conditions

Performance and Kinetics of Iron-Based Oxygen Carriers Reduced by Carbon Monoxide for Chemical Looping Combustion

Experiment and Rate Equation Modeling of Fe Oxidation Kinetics in Chemical Looping Combustion

Cerium Oxide Promoted Iron-based Oxygen Carrier for Chemical Looping Combustion

Particles attrition of binary mixtures in the coal-fueled chemical looping system based on fluidized bed

Spatial migration of lattice oxygen for copper-iron based oxygen carriers in chemical looping combustion

Attrition and morphological analysis of CaCO 3 corresponding to oxy-fuel circulating fluidized bed conditions

Comparison of Metallic Oxide, Natural Ore and Synthetic Oxygen Carrier in Chemical Looping Combustion Process

Interaction Between Iron-Based Oxygen Carrier and Four Coal Ashes During Chemical Looping Combustion

Quantitative Evaluation of Four Oxygen Carriers for Natural Gas Chemical Looping Combustion

Micro-structure change and crystal-structure modulated of oxygen carriers for chemical looping: Controlling local chemical environment of lattice oxygen

Spatial evolution characteristics of active components of copper-iron based oxygen carrier in chemical looping combustion

Mechanism of Phase Segregation in Ilmenite Oxygen Carriers for Chemical-Looping Combustion

Study on the synergistic effect and oxygen vacancy of CeO2/Fe2O3 oxygen carrier for improving reactivity in carbon monoxide chemical looping combustion