Abstract:In this research, we present a novel design protocol for the in-situ synthesis of MgAl layered double hydroxide-copper metal–organic frameworks (LDH-MOFs) nanocomposite based on the electrocoagulation process and chemical method. The overall goal in this project is the primary synthesis of para-phthalic acid (PTA) intercalated MgAl-LDH with Cu (II) ions to produce the paddle-wheel like Cu-(PTA) MOFs nanocrystals on/in the MgAl-LDH structure. The physicochemical properties of final product; Cu-(PTA) MOFs/MgAl-LDH, were characterized by the surface analysis and chemical identification methods (SEM, EDX, TEM, XRD, BET, FTIR, CHN, DLS, etc.). The Cu-(PTA) MOFs/MgAl-LDH nanocomposite was used to modification of the carbon paste electrode (CPE); Cu-(PTA) MOFs/MgAl-LDH/CPE. The electrochemical performance of Cu-(PTA) MOFs/MgAl-LDH/CPE was demonstrated through the utilization of electrochemical methods. The results show a stable redox behavior of the Cu (III)/Cu (II) at the surface of Cu-(PTA) MOFs/MgAl-LDH/CPE in alkaline medium (aqueous 0.1 M NaOH electrolyte). Then, the Cu-(PTA) MOFs/MgAl-LDH/CPE was used as a new electrocatalyst toward the oxidation of formaldehyde (FA). Electrochemical data show that the Cu-(PTA) MOFs/MgAl-LDH/CPE exhibits superior electrocatalytic performance on the oxidation of FA. Also the diffusion coefficient, exchange current density (J°) and mean value of catalytic rate constant (K cat ) were found to be 1.18 × 10 –6 cm 2 s −1 , 23 mA cm -2 and 0.4537 × 10 4 cm 3 mol −1 s −1 , respectively. In general, it can be said the Cu-(PTA) MOFs/MgAl-LDHs is promising candidate for applications in direct formaldehyde fuel cells.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop a new method for synthesizing MgAl - layered double hydroxide - copper metal - organic frameworks (LDH - MOFs) nanocomposites and apply them to the electrocatalytic oxidation of formaldehyde. Specifically, the research objective is to in - situ synthesize terephthalic acid (PTA) - intercalated MgAl - LDH with Cu(II) ions through the electrocoagulation process and chemical methods to generate Cu - (PTA) MOFs nanocrystals with a paddle - wheel - like structure. These nanocomposites are then used to modify carbon paste electrodes (CPE) to evaluate their electrocatalytic performance for formaldehyde oxidation in alkaline media. ### Main contributions of the paper: 1. **Synthesis of new materials**: A new design protocol is proposed to in - situ synthesize MgAl - LDH - Cu MOFs nanocomposites through the electrocoagulation process and chemical methods. 2. **Material characterization**: The physicochemical properties of the final product are analyzed in detail using multiple characterization techniques (such as SEM, EDX, TEM, XRD, BET, FTIR, DLS, etc.). 3. **Evaluation of electrochemical performance**: The electrocatalytic performance of Cu - (PTA) MOFs/MgAl - LDH/CPE is evaluated by electrochemical methods (such as cyclic voltammetry, galvanostatic method and pseudo - steady - state polarization). 4. **Application prospects**: The research shows that Cu - (PTA) MOFs/MgAl - LDH/CPE exhibits excellent electrocatalytic performance in formaldehyde oxidation and has the potential to be a catalyst for direct formaldehyde fuel cells. ### Key findings: - **Stable redox behavior**: Cu(III)/Cu(II) exhibits stable redox behavior on the surface of Cu - (PTA) MOFs/MgAl - LDH/CPE. - **Excellent electrocatalytic performance**: Cu - (PTA) MOFs/MgAl - LDH/CPE exhibits superior electrocatalytic performance in formaldehyde oxidation, with the diffusion coefficient, exchange current density and catalytic rate constant being \(1.18\times 10^{-6}\, \text{cm}^2\, \text{s}^{-1}\), 23 mA cm\(^{-2}\) and \(0.4537\times 10^4\, \text{cm}^3\, \text{mol}^{-1}\, \text{s}^{-1}\) respectively. ### Formula presentation: - **Linear dependence of the diffusion - controlled process**: \[ I_p\propto v^{1/2} \] - **Calculation of the transfer coefficient**: \[ E_p = k+\left(\frac{2.3RT}{(1 - \alpha_s)nF}\right)\log(v) \] - **Calculation of the surface coverage**: \[ I_p=\frac{n^2F^2}{4RT}\nu A\Gamma^* \] - **Randles - Sevcik equation**: \[ I_p = 2.69\times 10^5 A D^{1/2}n^{3/2}C v^{1/2} \] These formulas and results indicate that the synthesized Cu - (PTA) MOFs/MgAl - LDH nanocomposites have significant electrocatalytic activity in formaldehyde oxidation, providing new ideas for the development of efficient and low - cost electrocatalysts.

A new method for the preparation of MgAl layered double hydroxide-copper metal–organic frameworks structures: application to electrocatalytic oxidation of formaldehyde

The direct assembly of Mg-Al LDH nanosheets and Mn(ii)-salen complex into sandwich-structured materials and their enhanced catalytic properties

Facile Synthesis of PtCu3alloy Hexapods and Hollow Nanoframes As Highly Active Electrocatalysts for Methanol Oxidation

Preparation of Amine-Modified Cu-Mg-Al LDH Composite Photocatalyst

Metal-organic framework-derived nanoflower and nanoflake metal oxides as electrocatalysts for methanol oxidation

In Situ Surface PtCu Alloying on Delafossite-type CuAlO 2 as Electrocatalyst for Enhanced Methanol Oxidation

Electrooxidation of Formaldehyde on Silver/Ordered Mesoporous Carbon Composite Electrode in Alkaline Solutions

Evaluating the efficiency of CuCo-based metal-organic framework-derived materials for electrocatalytic oxidation of alcohols

Corrosion-Engineered Morphology and Crystal Structure Regulation toward Fe-Based Efficient Oxygen Evolution Electrodes

Classical Keggin Intercalated into Layered Double Hydroxides: Facile Preparation and Catalytic Efficiency in Knoevenagel Condensation Reactions

Facile assembly for fast construction of intercalation hybrids of layered double hydroxides with anionic metalloporphyrin.

Electrochemical investigation of a new Cu-MOF and its electrocatalytic activity towards H2O2 oxidation in alkaline solution

Designing New Material Based on Functionalized Multi-Walled Carbon Nanotubes and Cu(OH)2–Cu2O/Polypyrrole Catalyst for Ethanol Oxidation in Alkaline Medium

MnCo-Layered double hydroxides nanosheets supported Pd nanoparticles for complete catalytic oxidation of formaldehyde at room temperature

Novel Fe-MOF@Cu/NiAl-LDH as Photo-Catalysts in Methane Bireforming: Effect of Preparation Strategy

Designing ternary Co-Ni-Fe layered double hydroxides within a novel 3D cross-flower framework for efficient catalytic performance in oxygen evolution reaction

M(II)Al4 Type Layered Double Hydroxides—Preparation Using Mechanochemical Route, Structural Characterization and Catalytic Application

In Situ Transformation of MOFs into Layered Double Hydroxide Embedded Metal Sulfides for Improved Electrocatalytic and Supercapacitive Performance

Controllable preparation of Cu2O/Cu-CuTCPP MOF heterojunction for enhanced electrocatalytic CO2 reduction to C2H4

Alkali-modified copper manganite spinel for room temperature catalytic oxidation of formaldehyde in air

Amorphous Metal-Organic Framework-Derived Electrocatalyst to Boost Water Oxidation.