Abstract:In recent years, inspired by “biomimicry”, superhydrophobic surfaces have gained significant attention. Superhydrophobic surfaces demonstrate notable advantages in addressing interfacial issues, and superhydrophobic coatings exhibit excellent waterproofness, anti-fouling, self-cleaning, anti-corrosion, and additional capabilities, making them promising next-generation waterproof materials. However, the complex preparation process, coupled with poor wear resistance and environmental durability, severely limits their practical applications. Therefore, this article started from simplifying the preparation process and improving the durability of the coatings. Epoxy resin (E51) was used as the film-forming material, and carbon nanotubes (CNTs) and dual-sized SiC particles (nano-SiC and micro-SiC) were used as the fillers. Room temperature vulcanized silicone rubber (RTV) was used as a binder interacting with epoxy resin to promote the interface interaction between the fillers and the polymers. This process resulted in the successful preparation of superhydrophobic coatings with outstanding comprehensive performance. When the ratio of μ-SiC to n-SiC was 1:1, the prepared coating exhibited the best superhydrophobic properties with a water contact angle (WCA) of 167.4° and a sliding angle (SA) of 4.6°. Even after undergoing severe mechanical tests, such as sandpaper abrasion for 1000 cycles, sand impact for 100 cycles, cross-cut test, and tape-peeling for 70 cycles, the coatings still maintained their non-wetting Cassie-Baxter state. Furthermore, even after immersion in strong acid, strong alkali and 3.5 wt% NaCl solutions for 6 days, keeping at 500 °C for 2 hours, and exposure to ultraviolet for 6 days, the coatings still exhibited excellent superhydrophobicity. This suggested that the prepared coating had excellent chemical stability and high-temperature resistance. In addition, the superhydrophobic coating exhibited exceptional capabilities in self-cleaning, anti-corrosion, anti-icing, and de-icing properties. Furthermore, this coating, applicable to diverse substrates including board, steel, paper, and glass, demonstrated an impressive water contact angle (WCA) and sliding angle (SA). The spraying method offers the benefits of simplicity and cost-effectiveness. This is poised to significantly broaden its practical applications in various fields, including construction, transportation, and the chemical industry.

Versatile nonfluorinated superhydrophobic coating with self-cleaning, anti-fouling, anti-corrosion and mechanical stability

Multifunctional and fluorine-free superhydrophobic composite coating based on PDMS modified MWCNTs/ZnO with self-cleaning, oil-water separation, and flame retardant properties

A Novel Composite Protective Coating with UV and Corrosion Resistance: Load Floating and Self-Cleaning Performance

A robust, room-temperature curable and molecular-level superhydrophobic coating with excellent antibacterial and antifouling properties

Facile Fabrication of Superhydrophobic Nanocomposite Coatings Based on Water‐Based Emulsion Latex

Fabrication of a Fluorine-Free Photocatalytic Superhydrophobic Coating and Its Long-Lasting Anticorrosion and Excellent Antibacterial Abilities

Robust superhydrophobic silicone/epoxy functional coating with excellent chemical stability and self-cleaning ability

Superhydrophobic Self-Cleaning Hierarchical Micro-/Nanocomposite Coating with High Corrosion Resistance and Durability

Preparation of superhydrophobic coatings with excellent mechanical and chemical stability by one-step spraying method with selected fluorine-free modifiers

Durable, Self-Cleaning and Anti-Fouling Superhydrophobic Coating Based on Double Epoxy Layer

Robust, Transparent, and Superhydrophobic Coating Fabricated with Waterborne Polyurethane and Inorganic Nanoparticle Composites

A double-layer multifunctional superhydrophobic coating with excellent anti-corrosion performance based on fluorine-free chemicals

Eco-friendly waterborne superhydrophobic/superoleophilic FEVE composite coating with prolonged mechanochemical and anti-scaling properties

Constructing a robust ZIF-7 based superhydrophobic coating with the excellent performance in self-cleaning, anti-icing, anti-biofouling and anti-corrosion

Large-scale Fabrication of Durable and Robust Super-Hydrophobic Spray Coatings with Excellent Repairable and Anti-Corrosion Performance

Waterborne superhydrophobic coating with abrasion and corrosion resistant capabilities

Fabrication of high-durability superhydrophobic coatings based on dual-sized SiC particles

A non-fluorinated superhydrophobic composite coating with excellent anticorrosion and wear-resistant performance

Superhydrophobic epoxy resin coating with composite nanostructures for metal protection

Fabrication of superhydrophobic coating via a facile and versatile method based on nanoparticle aggregates

Rational fabrication of high-durability superhydrophobic coatings based on the excellent compatibility between nanoparticles and polymers