Abstract:Permanent magnet Vernier motors (PMVMs) possess the advantage of high torque density for high-performance applications. However, the low power factor challenge makes it unacceptable for direct-drive applications. A lack of accurate modeling method based on the motor sizing law, i.e., air-gap flux density, linear current density, and motor geometry parameters, raises difficulties for machine designers to further conduct research on the performance metrics. This article presents a deep investigation into the analytical modeling technique for surface PMVMs (SPMVMs). It can identify an accurate approach to obtain the performance metrics, including electromagnetic torque and power factor. The modeling technique is developed based on the conformal mapping method. By using this, both radial and tangential permeability functions can be calculated to obtain the motor magnetic loading accurately, considering the leakage flux. The slotting effect on both air-gap flux density and armature-winding function is analyzed to achieve a precise formula for torque and power factor computations. The new modeling technique is applied to integral-slot SPMVMs with different slot/pole combinations, gear ratios, slot openings, and magnet thickness to evaluate the impacts of motor parameters on high-power-factor and high-torque-density designs. Finally, an SPMVM with the characteristics of high torque density and power factor is fabricated to verify the analytical model at the power rating of 0.8 kW and the speed of 500 r/min. The experimental results show that the prototype exhibits a high power factor of 0.9 and high torque density 22.5 Nm/L.

Performance Analysis of Surface-Mounted Permanent Magnet Motor Based on Maximum Current without Demagnetization

Analytical Modeling of Surface-Mounted PM Machines Accounting for Magnet Shaping and Varied Magnet Property Distribution

Influence of Load Characteristics on Three-Phase Short Circuit and Demagnetization of Surface-Mounted PM Synchronous Motor

Deep-investigated Analytical Modeling of a Surface Permanent Magnet Vernier Motor

Investigation of Analytical Models for Surface-Mounted Permanent Magnet Motor Using Voltage Source Inverter

Strength Analysis for Surface-mounted Permanent Magnet Rotor in High-Speed Motor

Optimized Design of High Torque Density Permanent Magnet Synchronous Motor with Halbach Magnet

Design and Function Analysis of Multiphase PM Bearingless Motor with Single Set of Windings

Dynamic Modeling of Surface-Mounted Permanent Magnet Motors Considering Saturation

Nonlinear Analytical Modelling for Surface-Mounted Permanent Magnet Motors with Magnet Defect Fault

Analytical Solution of Air-Gap Field in Motors with Parallel Magnetized Permanent Magnets

Investigation on Maximum Electromagnetic Torque of Permanent-Magnet Synchronous Machines.

The Scalable Analytical Model for Calculating the Magnetic Field of Surface-Mounted Permanent Magnet Motor

Design Permanent-Magnet Material of Permanent-Magnetic Synchronous Motor

Modeling, Analysis, and Suppression of Demagnetization for MTPA-Driven Permanent Magnet Motors With Distributed Windings

Analytical Solution for Electromagnetic Performance Analysis of Permanent Magnet Synchronous Motor with a Parallel Magnetized Cylindrical Permanent Magnet

Magnetic Field Analysis of an Inner-Mounted Permanent Magnet Synchronous Motor for New Energy Vehicles

Performance Improvement of Surface Permanent Magnet Vernier Motor by Adjusting Current Control Angle Considering Magnetic Saturation

Magnetic Field Analysis of Surface-Mounted Permanent Magnet Motors Based on an Improved Conformal Mapping Method

Design,Analysis and Experimental Validation of a Modular Permanent-Magnet Machine

Comparative Study of Surface-Mounted and Interior Permanent-Magnet Motors for High-Speed Applications