Progress of Salt - tolerant Super Absorbent Polymer

Li Min,Wang Li,Jiang Ailing

DOI: https://doi.org/10.3969/j.issn.1007-1865.2006.03.026

2006-01-01

Abstract:water-absorption mechanism and influence of salts on water-absorption of super absorbent polymer were introduced in this paper. Several efficient methods for increasing the salt tolerance of super absorbent polymer were discussed.

What problem does this paper attempt to address?

Research progress of salt-resistant superabsorbent polymer based on polyacrylic acid

Yan Xiaomei,Shen Huifang

DOI: https://doi.org/10.3969/j.issn.1006-3536.2013.04.011

2013-01-01

Abstract:Based on the absorption mechanism,the methods to raise the salt resistance of superabsorbent polymer based on polyacrylic acid were introduced.These methods included the incorporation of various hydrophilic groups into the polymer,changing the cross-linking agent,graft copolymerization with natural hydrophilic macromolecular compounds or natural inorganic compounds.The development trends of salt tolerant superabsorbent polymer based on polyacrylic acid was took an outlook.
Research progress in improvement of anti-salt property of superabsorbent polymer

Zhang Haoyue,Yu Zhenfei,Chen Yu,Zhang Dalun,Tan Huimin

DOI: https://doi.org/10.3969/j.issn.1006-3536.2011.07.010

2011-01-01

Abstract:Described the important of high anti-salt property for the application of superabsorbent polymer,and reviewed the technique to improve the anti-salt property of superabsorbent polymer.The ways to promote anti-salt property of acrylic superabsorbent polymer,such as introducing of different monomers,diversification of hydrophilic groups,were introduced.Ulteriorly,the study direction to promote anti-salt property of superabsorbent polymer was took a outlook.
Progress of Salt-Tolerant Super Absorbent Resins

曹丽琴,徐世美,封顺,王吉德

DOI: https://doi.org/10.3321/j.issn:0253-4320.2003.z1.017

2003-01-01

Abstract:Many methods to improve the salt tolerant ability of super absorbent resins are reviewed, including the grafting of the anti-salt non-ionic hydrophilic group, anti-salt crosslinked agents and anti-salt ionic group, and the mixing of the super ab- sorbent resin with inorganic gel and ion-exchange resin. It is indicated that the future study should be concentrated on improving the preparation processes and technology including the solid phase synthesis, the template synthesis, as well as the disk type technology; selecting new reaction initiator systems, using physical methods such as ~(60)Co radiation and the microwave irradiation method. Furthermore, the salt tolerant mechanism should be given more attention.
Superabsorbent polymer used for saline-alkali soil water retention

Cui Zhang,J. Viridiana García Meza,Keqiang Zhou,Jiazhi Liu,Shaoxian Song,Min Zhang,Delong Meng,Jinhui Chen,Ling Xia,Hu Xiheng

DOI: https://doi.org/10.1016/j.jtice.2023.104830

IF: 5.477

2023-04-01

Journal of the Taiwan Institute of Chemical Engineers

Abstract:Background Enhancing the water retention capacity of soil is an effective measure to curb soil salinization. Superabsorbent polymer (SAP) with a strong absorbing water ability is particularly suitable as a water-retaining agent in agriculture. However, their limited salt tolerance restricts their applicability in saline-alkali soil. Hence, this research aimed to develop a salt-tolerant superabsorbent polymer (ST-SAP) that can be utilized in saline-alkali soil. Methods ST-SAP, prepared by using 2-acrylamide-2-methylpropanesulfonic acid (AMPS), acrylic acid (AA) and acrylamide (AM), was evaluated by swelling and reswelling experiments. The salt-tolerant mechanism of ST-SAP was studied by XPS, FT-IR and CT. The water retention capacity of saline-alkali soil, collected from Lop Nur of Xinjiang and containing 18.13 wt% total dissolved salt, was determined to validate the effectiveness of ST-SAP in high-salt soil. Significant Findings The ST-SAP synthesized in this study exhibited excellent swelling capacity (69.04 g/g) under high salt condition. Notably, ST-SAP presented exceptional stability under high salt condition, due to the complexation reaction between Ca2+and its three hydrophilic groups (R-SO3H, R-COOH, R-CONH2). Moreover, when 2 wt% ST-SAP was added to the saline-alkali soil, the water retention time was extended to 28 days, confirming the efficacy of ST-SAP in saline-alkali soil.

engineering, chemical
Salt-Tolerant Superabsorbent Polymer with High Capacity of Water-Nutrient Retention Derived from Sulfamic Acid-Modified Starch

Chenhao Zhao,Min Zhang,Zhiguang Liu,Yanle Guo,Qiang Zhang

DOI: https://doi.org/10.1021/acsomega.9b00486

IF: 4.1

2019-03-28

ACS Omega

Abstract:The application of superabsorbent polymers (SAPs) is hindered because their absorption capability is greatly affected by the electrolytes in a solution. A novel modified water-absorbent polymer was fabricated by solution polymerization of sulfamic acid-modified starch and acrylic acid; the swelling ratios of this absorbent polymer were 1026 g/g in deionized water and 145 g/g in 0.9% sodium chloride solution and increased by 99.5 and 13.4%, respectively, when compared with ordinary starch-grafted acrylic SAPs. The water absorption capacity was measured in water at different pH values, salt concentrations, and temperatures. In addition, water and fertilizer retentions were studied by simulated leaching tests in a soil column. The results showed that water absorption capacities of the modified SAP in salt solutions were improved due to the adsorption and transfer of water molecules by the sulfonic acid groups. Compared to the losses when there was no superabsorbent treatment, the water, nitrate, ammonium nitrogen, and water-soluble potassium losses during the salt-tolerant superabsorbent treatment were significantly reduced by 18.5, 22.8, 88.0, and 63.8%, respectively. The method introduced in this study could guide the development and wide application of salt-tolerant SAPs in agriculture and horticulture.
Synthesis and Properties of Super Absorbents Poly(acrylic Salt - Acrylamide) by Inverse Suspension Polymerization

ZHANG Sheng-zu,DU Yong,YUAN Ting,XU Qiang

DOI: https://doi.org/10.3969/j.issn.1009-5160.2011.03.008

2011-01-01

Abstract:Super water absorption polymers have found more and more special uses in agriculture,health caring,chemical industry,and have attracted scientists,attention.This article reported Poly(acrylic salt-acrylamide) as super water absorption polymers synthesized by the method of inverse suspension polymerization,in which acrylic acid and acrylamide were as monomers,N,N'-Methylenebisacrylamide as cross linking agent,and Span-60 as suspension stabilizer.The influence of reaction conditions,such as amount of cross linking agent,the concentration of suspension stabilizer,the degree of neutralization of acrylic acid,the ratio between monomers,and water absorption speed of the copolymer,were studied.The water absorption capacities of the optimum super water absorption polymers obtained were 1100 g/g,90 g/g and 75 g/g in distilled water,0.9% NaCl solution,and mimicking blood respectively.
Preparation of Superabsorbent Polymers with Increased Saline Absorbency

Ming Liu,Xianfang Song,Jin,Yifen,Quan Zhou,Xiang Xia

2002-01-01

Abstract:Superabsorbent having enhanced absorbency of 0.9%NaCl solution was synthesized on one basis of incorporating zwitterionic (sulfobetaine) monomer into the previous monomer mixture, which comprises ionic (AA) and nonionic monomers, and another basis of introducing inorganic salt B. As far as saline absorbency is concerned, introduction of inorganic salt B is more useful than the sulfobetaine monomer.
Applications and Modification of Polyacrylic Superabsorbents

褚建云,王罗新,刘晓东,段煜,杜宗良

DOI: https://doi.org/10.3969/j.issn.1004-7964.2003.03.009

2003-01-01

Abstract:The applications of superabsorbents are introduced, and the mainly modifying methods for improving the water salt-resistance properties of polyacrylic superabsorbents, including the incorporation of other hydrophilic groups, the incorporation of hydrophobic long-chain and the synthesis of polyampholyte superabsorbents, are described in detail. 
Synthesis and Properties of Acrylic-Based Superabsorbents with Enhanced Crosslinking on Particle Surface

J Huang,ZM Huang,YZ Bao,ZX Weng

DOI: https://doi.org/10.1142/s0256767905000655

2005-01-01

Abstract:A series of acrylic-based superabsorbent resins were synthesized by inverse suspension polymerization, using potassium persulfate as the initiator, N, N'-methylene bisacrylamide (BIS) and divinylbenzene (DVB) as the multiple crosslinking agents. The morphology of the resulting superabsorbent resins revealed by SEM demonstrated that a hard shell layer was indeed formed due to surface crosslinking. The swelling and deswelling properties, and the mechanical strength of superabsorbents were investigated. The results indicated that the adding time of DVB and the amount of DVB participated in the crosslinking show a significant influence on the properties of superabsorbents. When DVB was added in polymerization later, the amount of DVB participated in reaction decreases and the surface crosslinked shell becomes thinner. It is suitable for DVB to be introduced in the later stage of the polymerization process, because the absorption rate of resin is efficiently improved in conjunction with higher water absorption. Furthermore, it was found that the mechanical strength of swollen superabsorbent with surface crosslinking was indeed enhanced in comparison with that of the conventional one.
Synthesis of acryli quaternary salt-tolerant superabsorbent resin

ZHOU Ai-jun,FU Yan-mei,PENG Xu,WAN Xiang-gang,ZHONG Yi,JIANG Xue-liang

DOI: https://doi.org/10.3969/j.issn.1674-2869.2012.05.001

2012-01-01

Abstract:The AA-AM-AMPS-DMDAAC four component copolymer of salt-tolerant superabsorbent resin with high absorbability in saline and high absorption rate was synthesized by inverse suspension copolymerization,with Cyclohexane as dispersing medium,Span-80 as dispersing agent,K2S2O8 as initator,N,N-Methylenebisacrylamide as cross-linking agent.The effects of different mass ratio between acrylic acid and acrylamide on water absorption were studied,and the results show that when the mass ratio is m(AA)∶ m(AM)=4∶ 1,the salt-resistant superabsorbent resin has the best water absorbing capacity,the swelling capacity of pure water,0.9% NaCI solution,2% NaCI solution and 5% NaCl solution is found to be 500 g.g-1,200 g.g-1,150 g.g-1 and 60 g.g-1,respectively.Compared to traditional multigroup-cooperated superabsorbent resin(AA/AMPS/DMDAAC) by Fourier transform infrared spectroscopy(FT-IR) and Thermogravimetric analysis(TG),these monomers have linked each other and the function groups have cooperated effectively;microscopic morphology of quaternary product are determined by particle size measurement and scanning electron microscopy(SEM).
Swelling Behaviors of Superabsorbent Composites Based on Acrylic Acid/Acrylamide Copolymer and Attapulgite

Ren,Ren,Tao,Ren

DOI: https://doi.org/10.3390/min14060593

IF: 2.5

2024-06-06

Minerals

Abstract:The swelling behaviors and water retention of superabsorbent sand-fixing materials prepared from acrylic acid/acrylamide copolymer (AA/AM) and acid-modified attapulgite under ultrasonic treatments and different pH conditions were investigated. The results demonstrated that a suitable amount of attapulgite can effectively improve the absorption capacity and saltwater performance. The superabsorbent achieved the highest absorptions of 1257.54 g/g and 209.45 g/g in distilled water and a 0.9 wt% NaCl solution, and a higher water absorbency occurred over a wide pH range of 5~9 when the ultrasonic power was 200 W and the attapulgite content was 10%. The addition of attapulgite could significantly increase the water absorption and retention.

geochemistry & geophysics,mineralogy,mining & mineral processing
Synthesis and Properties of Acrylic-Based Superabsorbent

XP Chen,GR Shan,J Huang,ZM Huang,ZX Weng

DOI: https://doi.org/10.1002/app.20052

IF: 3

2004-01-01

Journal of Applied Polymer Science

Abstract:Acrylic-based superabsorbent polymers with partial-neutralized acrylic acid were synthesized by inverse suspension polymerization. The effects of reaction parameters, including the concentration of crosslinking agent and initiator, the neutralization degree of monomer, the monomer concentration, and phase ratio of a system, on the water absorption have been investigated. Furthermore, to improve the properties of salt-resistance and antielectrolyte for the polymer, acrylamide monomer containing non-ionic and hydrophilic groups was introduced into the system, which can suppress the salt effect and homoion effect. The water absorption Q(5/3) is proportional to the reciprocal of ionic strength, 1/S, which follows Flory's elasticity gel theory. (C) 2004 Wiley Periodicals, Inc.
Preparation and Morphology of High‐performance Exfoliated Poly(sodium Acrylate)/hydrotalcite Nanocomposite Superabsorbents

Yatao Zhang,Lihai Fan,Lihua Cheng,Lin Zhang,Huanlin Chen

DOI: https://doi.org/10.1002/pen.21252

2008-01-01

Abstract:A poly-matrix composite-poly(sodium acrylate) (PSA)/hydrotalcite (HT) (PSA/HT) nanocomposite superabsorbent-with obvious improvements in both the water absorbency and salt absorbency has been prepared by the intercalated HT, using sodium methyl allyl sulfonate as an intercalation agent. The superabsorbents acquired their highest water (salt) absorbency when the content of HT is 3 wt%. The highest absorbency for deionized water and 0.9 wt% NaCl ((aq)) were 1100 g/g and 145 g/g, respectively. Microstructures were analyzed by X-ray diffraction and scanning electron microscope. Chemical analysis was determined measurements. Results showed that HT incorporated into the superabsorbents was by Fourier infrared spectroscopy and energy dispersion spectroscopy. Results showed that the superabsorbent particles were in the form of spheres, and the hydrogels were in the form of regular network structures. POLYM. ENG. SCI., 49:264271, 2009. (C) 2008 Society of Plastics Engineers
Synthesis and characterization of reinforced acrylic-based superabsorbents crosslinked with divinylbenzene

Jian Huang,Zhi-Ming Huang,Yong-Zhong Bao,Zhi-Xue Weng

DOI: https://doi.org/10.1002/app.23604

IF: 3

2006-01-01

Journal of Applied Polymer Science

Abstract:A series of superabsorbent polymers were synthesized by an inverse suspension polymerization, with potassium persulfate as the initiator, Span60 as the dispersant, and N,N'-methylene bisacrylamide (BIS) and divinylbenzene (DVB) as multiple crosslinkers. The synthesis conditions, including the amount of dispersant, concentration of crosslinkers, oil-to-water phase ratio (O/W) of the polymerization system, total monomer concentration, and acrylamide (AM) content were studied. The results indicated that there were optima for the following properties: BIS crosslinker concentration (0.075 wt %), O/W (3:1), total monomer concentration (37.5 wt %), and AM content (5 wt %). In addition, the particle size had a significant influence on the absorption speed, and the absorption speed increased with decreasing particle size. In comparison with the conventional sample crosslinked only by BIS, the superabsorbent with the same particle size but crosslinked by multiple crosslinkers had the higher absorption rate because of surface crosslinking. It also showed that the salt resistance and antihydrolyzing property of the superabsorbent crosslinked by multiple crosslinkers (BIS and DVB) were enhanced, which was also attributed to surface crosslinking by DVB. (c) 2006 Wiley Periodicals, Inc.
Preparation, swelling behaviors and application of polyacrylamide/attapulgite superabsorbent composites

Junping Zhang,Ruifeng Liu,An Li,Aiqin Wang

DOI: https://doi.org/10.1002/pat.676

IF: 3.348

2006-01-01

Polymers for Advanced Technologies

Abstract:A series of superabsorbent composites, polyacrylamide/attapulgite (PAMA), were prepared from acrylamide (AM) and attapulgite micropowder in aqueous solution, using N,N'-methylenebisacrylamide (MBA) as a crosslinker and ammonium persulfate (APS) as an initiator and then saponified with sodium hydroxide solution. This paper focuses on swelling behaviors of the PAMA superabsorbent composites in various saline solutions. The results indicate that saline solutions can weaken the swelling abilities of the PAMA compsites greatly. Water absorbency of the PAMA composites with 20 and 40 wt% attapulgite in aqueous chloride salt solutions has the following order: Li+=Na+=K+, Mg2+>Ca2+=Ba2+ all through the range of concentration investigated. However, swelling properties of the composites are complicated in CuCl2(aq), AlCl3(aq) and FeCl3(aq) solutions and are related to saline solutions concentration. The deswelling behavior of PAMA composites is more obvious in univalent chloride salt solutions than in divalent and trivalent ones. The influence of kind and valence of anions on swelling ability of the composites is limited and almost the same. Moreover, reswelling capability, practical water retention ability in sand soil of the composites and the effect of pH on water absorbency of the PAMA composites were investigated. The PAMA composite shows good water retention and reswelling ability in sand soil, and may be used as a recyclable water-managing material for the renewal of and and desert environment. Copyright (C) 2006 John Wiley & Sons, Ltd.
Preparation and Characterization of Poly(acrylic Acid-Co-acrylamide)/hydrotalcite Nanocomposite Superabsorbent

张亚涛,张林,陈欢林

DOI: https://doi.org/10.3321/j.issn:0438-1157.2008.06.036

2008-01-01

Abstract:The hydrotalcite (HT) synthesized with urea method was used to prepare intercalated HT (SMAS-HT) by using methyl allyl sulfonate (SMAS) as an intercalation agent.A novel poly (acrylic acid-co-acrylamide)/HT nanocomposite superabsorbent was prepared by inverse polymerization, using N,N′-methylenebisacrylamide (NMBA) as a crosslinking agent and potassium persulfate (KPS) as an initiator.The structure and morphology were characterized by FTIR, XRD and SEM.The influences of the amount of SMAS-HT on the water (salt) absorbency were studied.The results showed that the intercalation was successful and SMAS-HT was completely exfoliated after polymerization.Adding a small amount of SMAS-HT could effectively improve the water (salt) absorbency of nanocomposite superabsorbents.The nanocomposite superabsorbents had their highest water (salt) absorbency when the content of SMAS-HT was 3.0%(mass).
Synthesis and Swelling Behavior of a High Temperature-Resistant Superabsorbent

Wei Wu,Tao Chen,Xiangpeng Wang,Liang Li,Ruonan Wu,Xiaoyun Zhang

2015-01-01

JOURNAL OF POLYMER MATERIALS

Abstract:A high-temperature resistant superabsorbent polymer (HT-SAP) was prepared by solution polymerization of partially neutralized acrylic acid (AA) and 2-acryloylamino-2-methyl-1-propanesuffonic acid (AMPS) using tetraallylammonium chloride (TAAC) as crosslinker and 2,2'-azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (AIBI) as initiator. The effects of reaction parameters, including the weight ratio of AMPS to AA, the amount of crosslinker and initiator on swelling behaviors of the superabsorbent were investigated. Under optimized condition, the maximum swelling capacity of HT-SAP in distilled water and saline solution was found to be 258 and 60 g/g at 280 degrees C, respectively, showing excellent high-temperature resistant and salt resistant properties. Observation from scanning electron microscopy (SEM) image indicated that its network structure was still well maintained after water absorption at 280 degrees C. This kind of superabsorbents has high application potentials in enhanced oil recovery.
Superabsorbent Polymer with Excellent Water/Salt Absorbency and Water Retention, and Fast Swelling Properties for Preventing Soil Water Evaporation

Haizhou Tian,Sha Cheng,Jianghong Zhen,Ziqiang Lei

DOI: https://doi.org/10.1007/s10924-022-02543-w

IF: 4.705

2022-11-06

Journal of Polymers and the Environment

Abstract:In arid areas, the rapid evaporation of water leads to severe water shortage for plant growth. Superabsorbent polymers have the prospect of preventing water evaporation because of its excellent water absorbency. However, insufficient in salt resistance, water retention, and swelling rate limit its application. Herein, we fabricated Hydroxyethyl cellulose-g-(Acrylic acid-co-2-Acrylamido-2-methyl-1-propane sulfonic acid)/laterite (HEC-g-P (AA-co-AMPS)/laterite) with exceptional abovementioned performances by aqueous solution polymerization. Under optimal synthesis conditions, the water absorbency of the superabsorbent polymer were 1294 g/g, 177 g/g, and 119 g/g in distilled water, tap water, and 0.9 wt% NaCl solution, respectively. The water retention of the superabsorbent polymer was still as high as 97.7% after 16 h at 25 °C, the water absorbency was up to 832 g/g after re-swelling for 5 times at 40 °C, and the water absorption reached swelling equilibrium was only 5 min. We investigated the effect of the mount of swollen hydrogel on the water evaporation rate in soil, and the results showed that hydrogels were effective in inhibiting soil water evaporation. Our study provides a new horizon for the application of superabsorbent polymer.

engineering, environmental,polymer science
Research on the mechanism of super absorbent polymer to soil water-holding characteristic

Yan-ling RAN,Yi-quan WANG,Run-xia ZHANG,Fei-hua ZHU,Jin LIU

DOI: https://doi.org/10.7606/j.issn.1000-7601.2015.05.19

2015-01-01

Abstract:In order to explore the function and mechanism by using the super absorbent polymer to improve soil wa-ter-holding characteristic , put three types of super absorbent polymers with different dosages (0 .05% , 0 .10% and 0 .50% ) into sand soil without aggregate pore ,to measure the soil moisture content of each treatment under different suc-tions ,successfully fitted soil water characteristic curve by V-G model ,and acquired the results of the soil water charac-teristic curve parameter and main water constants for each treatment .The results indicate that:(1 ) After using the super absorbent polymer ,except the soil unavailable water had no significant change ,the saturated soil water content ,field ca-pacity ,gravity water and available soil water in all treatments had significantly increased .When we used 0 .50% super absorbent polymer ,the field capacity in this treatment was 3~4 .7 times higher than the control group .Using the super absorbent polymer ,the water-holding capacity in middle and low water suction segment was significantly improved ,that was the soil pore for holding water .(2 ) The soil water characteristic curve for each treatment was moved to the right ,the water-holding capacity in each suction section was increased .The n value was total less than the control group ,which in-dicated that super absorbent polymer can significantly improve the soil water-holding capacity in the dehydration process . (3 ) After using the super absorbent polymer ,the soil added absorbent water mainly derived from gravity water and avail-able water .When we use 0 .05% of the super absorbent polymer ,the proportion of the gravity water in each treatment was high than 60% .With the dosages increasing ,the proportion of the gravity water was decreased and the available wa-ter was increased .It indicated that mechanism of super absorbent polymer to the soil water-holding characteristic was mainly embodied the increase of the proportion of water held by capillary pore .When use low dosage ,the soil gravity wa-ter can be significantly improved ,but with the increase of the dosage ,the soil available water was significantly improved . (4 ) Comprehensively compared the improving effect of the super absorbent polymer type ,the B3 with 0 .50% dosage was the best improvement effect .From this ,even though the super absorbent polymer was a kind of substrate with strong abil-ity of moisture-absorbing by molecule ,it can be greatly changed the water-holding capacity by soil pore and increase available soil water capacity .So it should be given great attention and widely used .
High salt tolerance hydrogel prepared of hydroxyethyl starch and its ability to increase soil water holding capacity and decrease water evaporation

Hongran Xiong,Hui Peng,Xi’e Ye,Yanrong Kong,Na Wang,Fenghong Yang,Ben-Hur Meni,Ziqiang Lei

DOI: https://doi.org/10.1016/j.still.2022.105427

IF: 7.366

2022-08-01

Soil and Tillage Research

Abstract:Hydroxyethyl starch (HES) and 2-Acrylamide-2-methyl-1-propanesulfonic acid (AMPS) as raw material, calcium alginate (CA33) was used as the main carrier for regulating and controlling soil water storage, and in situ polymerization with inorganic clay sodium bentonite to prepare a novel type of superabsorbent HES-PAM/bentonite and HES/CA33-PAM/ sodium bentonite composite materials using in-situ polymerization. The prepared hydrogel was characterized by scanning electron microscope (SEM), infrared spectrum (IR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The water absorption/release properties of the superabsorbent polymer were explored. The results showed that the new superabsorbent material reached salt equilibrium within 30 min. The water absorption rates in distilled water, tap water, and 0.9 wt% saline solution were 1484, 312, and 121 g/g. The successful inarching of calcium alginate improved the soil's water holding capacity and provided a slow water release, which increased the water absorption rate of the superabsorbent materials in distilled water and saline solution by 25.8% and 10%, respectively. The influence of soil types, particle diameter, and the content of superabsorbent materials on inhibiting soil water evaporation was studied. Therefore, having great application potential in the agricultural production of saline-alkali soils.

soil science

Progress of Salt - tolerant Super Absorbent Polymer

Research progress of salt-resistant superabsorbent polymer based on polyacrylic acid

Research progress in improvement of anti-salt property of superabsorbent polymer

Progress of Salt-Tolerant Super Absorbent Resins

Superabsorbent polymer used for saline-alkali soil water retention

Salt-Tolerant Superabsorbent Polymer with High Capacity of Water-Nutrient Retention Derived from Sulfamic Acid-Modified Starch

Synthesis and Properties of Super Absorbents Poly(acrylic Salt - Acrylamide) by Inverse Suspension Polymerization

Preparation of Superabsorbent Polymers with Increased Saline Absorbency

Applications and Modification of Polyacrylic Superabsorbents

Synthesis and Properties of Acrylic-Based Superabsorbents with Enhanced Crosslinking on Particle Surface

Synthesis of acryli quaternary salt-tolerant superabsorbent resin

Swelling Behaviors of Superabsorbent Composites Based on Acrylic Acid/Acrylamide Copolymer and Attapulgite

Synthesis and Properties of Acrylic-Based Superabsorbent

Preparation and Morphology of High‐performance Exfoliated Poly(sodium Acrylate)/hydrotalcite Nanocomposite Superabsorbents

Synthesis and characterization of reinforced acrylic-based superabsorbents crosslinked with divinylbenzene

Preparation, swelling behaviors and application of polyacrylamide/attapulgite superabsorbent composites

Preparation and Characterization of Poly(acrylic Acid-Co-acrylamide)/hydrotalcite Nanocomposite Superabsorbent

Synthesis and Swelling Behavior of a High Temperature-Resistant Superabsorbent

Superabsorbent Polymer with Excellent Water/Salt Absorbency and Water Retention, and Fast Swelling Properties for Preventing Soil Water Evaporation

Research on the mechanism of super absorbent polymer to soil water-holding characteristic

High salt tolerance hydrogel prepared of hydroxyethyl starch and its ability to increase soil water holding capacity and decrease water evaporation