Effect of N Plasma Immersion Ion Implantation (N-Piii) on the Microstructure and Mechanical Properties of 8cr4mo4v Steel
Jiaxu Guo,Zifeng Ding,Lina Zhou,Junbo Niu,Bin Miao,Xinxin Ma,Fang Ma
DOI: https://doi.org/10.1016/j.surfcoat.2024.131052
IF: 4.865
2024-01-01
Surface and Coatings Technology
Abstract:To enhance the surface hardness and wear resistance of 8Cr4Mo4V steel, nitrogen plasma immersion ion implantation (N-PIII) was carried out, under various nominal implantation energies, in this study. Additionally, the microstructure and mechanical properties of the steel were analyzed. The results indicated that the depth of the nitrogen ion-implanted layer escalated with the specified implantation energy, reaching 140 nm for a 50 keV sample. Nitrogen was present within the implanted layer in the martensite lattice as a solute, and also in the form of nitrides along with alloying elements. Moreover, a nanocrystalline layer approximately 40-70 nm thick also formed at the sample surface. As the implantation energy increased, both the surface roughness and residual stress of the sample initially increased before declining, whereas the surface hardness and modulus exhibited a gradual increase. After the 50 keV N-PIII treatment, the surface hardness of the sample increased by 39 %, which caused a remarkable reduction in the friction coefficient, and the wear amount was also reduced by about 40 %. This work systematically establishes the relationship between the surface microstructures, surface morphology, and mechanical properties of implanted 8Cr steel, and significantly improves its surface hardness and wear resistance.