Abstract:To date, optical lithography has been extensively used for in situ patterning of hydrogel structures in a scale range from hundreds of microns to a few millimeters. The two main limitations which prevent smaller feature sizes of hydrogel structures are (1) the upper glass layer of a microchip maintains a large spacing (typically 525 μm) between the photomask and hydrogel precursor, leading to diffraction of UV light at the edges of mask patterns, (2) diffusion of free radicals and monomers results in irregular polymerization near the illumination interface. In this work, we present a simple approach to enable the use of optical lithography to fabricate hydrogel arrays with a minimum feature size of 4 μm inside closed microchips. To achieve this, we combined two different techniques. First, the upper glass layer of the microchip was thinned by mechanical polishing to reduce the spacing between the photomask and hydrogel precursor, and thereby the diffraction of UV light at the edges of mask patterns. The polishing process reduces the upper layer thickness from ∼525 to ∼100 μm, and the mean surface roughness from 20 to 3 nm. Second, we developed an intermittent illumination technique consisting of short illumination periods followed by relatively longer dark periods, which decrease the diffusion of monomers. Combination of these two methods allows for fabrication of 0.4 × 10(6) sub-10 μm sized hydrogel patterns over large areas (cm(2)) with high reproducibility (∼98.5% patterning success). The patterning method is tested with two different types of photopolymerizing hydrogels: polyacrylamide and polyethylene glycol diacrylate. This method enables in situ fabrication of well-defined hydrogel patterns and presents a simple approach to fabricate 3-D hydrogel matrices for biomolecule separation, biosensing, tissue engineering, and immobilized protein microarray applications.

Technique of Surface Modification of A Cell-Adhesion-Resistant Hydrogel by A Cell-Adhesion-Available Inorganic Microarray

Preparation of Stable Micropatterns of Gold on Cell-Adhesion-resistant Hydrogels Assisted by a Hetero-Bifunctional Macromonomer Linker

Fabrication of micropatterns of nanoarrays on a polymeric gel surface.

Fabrication of Polyhema Grids by Micromolding in Capillaries for Cell Patterning and Single-Cell Arrays

Single-Cell Micropatterning by Non-fouling Hydrogels

A Simple Method For Fabrication Of Microstructures Using A Pdms Stamp

A facile method to in situ fabricate three dimensional gold nanoparticle micropatterns in a cell-resistant hydrogel

Efficient creation of cellular micropatterns with long-term stability and their geometric effects on cell behavior.

Fabrication of Microcapsule Arrays on Chemically Patterned Surfaces Via Covalent Linking

Micropatterning of Single Cell Arrays Using the PEG-Silane and Biotin–(Strept)Avidin System with Photolithography and Chemical Vapor Deposition

Patterning of Cells on Functionalized Poly(dimethylsiloxane) Surface Prepared by Hydrophobin and Collagen Modification.

Micropatterned Protein for Cell Adhesion Through Phototriggered Charge Change in a Polyvinylpyrrolidone Hydrogel

Facile Cell Patterning Induced by Combined Surface Topography and Chemistry on Polydopamine-Defined Nanosubstrates.

Photopatterning of Hydrogel Microarrays in Closed Microchips

Fabrication of robust hydrogel coatings on polydimethylsiloxane substrates using micropillar anchor structures with chemical surface modification.

Patterning of hydrophilic micro arrays with superhydrophobic surrounding zones

Cell Micropatterns Based on Silicone-Oil-modified Slippery Surfaces.

Microgels-on-macrogel: A Simple Cytophilic Surface Makeover of Soft Agarose Substrates

A Simplified Approach to Control Cell Adherence on Biologically Derived in Vitro Cell Culture Scaffolds by Direct UV-mediated RGD Linkage

Patterned Arrays of Supramolecular Microcapsules

Fabrication of RGD micro/nanopattern and corresponding study of stem cell differentiation.