Abstract:A promising lithium salt of Li difluorophosphate (LiPO2F2) is introduced and added to the basic electrolyte (1 M LiPF6 + dimethyl carbonate (DMC)/ethyl methyl carbonate (EMC)/propylene carbonate (PC)/fluoroethylene carbonate (FEC)) to enhance the electrochemical performance of lithium-ion batteries by changing its concentration at low temperatures. Experiments show that LiPO2F2 can obviously improve the electrolyte’s ionic conductivity, especially. Compared with the baseline (6.29, 5.14, 4.62, 3.77, and 3.15 mS cm–1) under the same conditions, the ionic conductivities of the 2 wt % LiPO2F2-containing electrolyte (2 LiPO2F2) are 7.18, 5.32, 5.23, 4.04, and 3.57 mS cm–1. From this, it is clear that the integrated low-temperature electrochemical performances have been significantly improved. The specific discharge capacities of the 2 wt % LiPO2F2-added electrolyte at 0.2C are 161.4, 157.2, 148.9, and 137.5 mAh g–1 in the range from 25 to −40 °C, which are significantly much higher compared with the basic electrolyte (145.3, 149.4, 135.1, and 107.0 mAh g–1, respectively). Additionally, the addition of LiPO2F2 can promote profoundly the composition and morphology characteristics of the cathode–electrolyte interface (CEI) film; namely, it is a uneven lithium alkyl carboxylate before the addition of LiPO2F2; after that, it becomes an even LiF film, and meanwhile, the new film will facilitate Li+ transport in the electrolyte, further boosting the eletrochemical performance of the cells under low temperatures. At −40 °C under the same current density, the specific discharge capacity is 81.97 mAh g–1 after 50 cycles, while at the same temperature, the specific discharge capacity of the basic electrolyte battery is only 33.37 mAh g–1; that is, the discharge capacity has a staggering 145.6% improvement at −40 °C. In conclusion, the lithium-ion batteries containing LiPO2F2 may meet the application requirements of ultra-low-temperature conditions.

Improvement in Discharge Rate and Low-Temperature Characteristics of Lithium Iodine Cells

Long-term discharge characteristics of lithium-iodine cells with an additive in poly(2-vinylpyridine) iodide

Improvement in the low temperature performance of gelled polymer lithium-ion cells

Anchoring Polyiodide to Conductive Polymers As Cathode for HighPerformance Aqueous Zinc-Iodine Batteries

Polyiodide-Shuttle Restricting Polymer Cathode for Rechargeable Lithium/Iodine Battery with Ultralong Cycle Life

Improvement of Lithium-Ion Battery Performance at Low Temperature by Adopting Ionic Liquid-Decorated PMMA Nanoparticles as Electrolyte Component

High Ion‐Conductive Interphase Enabled by Nitrate‐Ionic Liquid Additive for Low‐Temperature Lithium Metal Batteries

Improvement of lithium-ion battery performance at low temperature by adopting polydimethylsiloxane-based electrolyte additives

Cobalt-Doped Spinel Cathode for High-Power Lithium-Ion Batteries Toward Expanded Low-Temperature Applications

High performance Zn-I2 battery with acetonitrile electrolyte working at low temperature

Outstanding electrochemical performance of high-voltage LiNi1/3Co1/3Mn1/3O2 cathode achieved by application of LiPO2F2 electrolyte additive

Boosting High-Voltage Practical Lithium Metal Batteries with Tailored Additives

Lithium Difluorophosphate (LiPO 2 F 2 ): An Electrolyte Additive to Help Boost Low-Temperature Behaviors for Lithium-Ion Batteries

Boosting Low Temperature Performance of Lithium Ion Batteries at −40°С Using a Binary Surface Coated Li 3 V 2 (PO 4 ) 3 Cathode Material

Enhancing high-temperature storage performance for the commercial lithium-ion battery via a effective addtive strategy

Gel Polymer Electrolyte Enables Low-Temperature and High-Rate Lithium-Ion Batteries via Bionic Interface Design

Enhanced Diffusion Kinetics in Y-doped SnO2 Anodes for Low-Temperature Lithium-Ion Batteries: A Combined Theoretical and Experimental Study

Research Status of Low-Temperature Electrolyte Additives for Lithium-ion Batteries

Heat transfer characteristics and low-temperature performance of a lithium-ion battery with an inner cooling/heating structure

Copper Nitrate Enables High-performance Lithium-ion Batteries at Low Temperature

Anion‐Dominated Conventional‐Concentrations Electrolyte to Improve Low‐Temperature Performance of Lithium‐Ion Batteries