Abstract:Abstract To ensure that the mining steps of deep concave open-pit coal mines with heterogeneous complex rock masses in arid areas are safely bounded by the design requirements and form a fixed side wall, to avoid the occurrence of instability and disaster caused by blasting vibration, based on non-homogeneous rock mass structure, lithology characteristics, fracture surface composition, morphology and joints, analysis of fissure development trend, and case studies of wedge-shaped landslide accident caused by blasting vibration, we proposed: (1) The pre-split instantaneous denotation charge is the dosage used for the segment unit charge of the primary blast hole and buffer hole, and it’s used for calculating . Based on this, the time intervals of segmented detonating cord and fuse are calculated and the actual detonating unit charge is decided. (2) Leave lateral free surface on the fixed side boundary and drill inclined blast holes along the slope of the steps, connect detonating cords to the blasting network, multi-point instantaneous detonate uncoupled segmented charge holes, use the pre-crack and fracture surface to reduce the damage caused by the explosion shock wave of the primary and buffer blasting holes. (3) The main blast hole and buffer hole are connected by non-conductive detonating cord and “four-way” blasting network, couple continuous concentrated charge using non-conductive detonating cord and fuse plus or detonator plus segmented ammonium dynamite initiator and expanded ammonium oil charge for millisecond interval detonation. Control the number of blasting holes and unit detonating charge over equal segments of fuse and detonating cord, reduce the impact of close-range blasting vibration of vertical deep holes on fixed side wall and step slope. Results of the blasting experiment show that using the technology of detonating cord in combination with non-conductive detonator’s pre-split hole millisecond differential blasting network plus reserved free face and segmented unit charge detonation, provide 1-2 blasting lateral free face or positive free face, making the blasting effect dispersed around the blasting hole. It has better solved the major safety problem of instability and disaster caused by the blasting effect on the fixed border-to-boundary steps of deep concave open-pit mine in arid region.

Cutting Stability Analysis under the Influence of Blasting

Numerical Simulation of Dynamic Damage and Stability of a Bedding Rock Slope under Blasting Load

Optimization of Blasting Parameters Considering Both Vibration Reduction and Profile Control: A Case Study in a Mountain Hard Rock Tunnel

Analysis of swallowtail mutation instability of slope with weak interlayer under blasting disturbance

The Effects of Blast Damage Zone Thickness on Rock Slope Stability

Dynamic Response and Blast-Resistance Analysis of a Tunnel Subjected to Blast Loading

Evaluation of surrounding rock stability by optimizing Hoek-Brown criterion parameters under blasting loads

Study on Three-Dimensional Dynamic Stability of Open-Pit High Slope under Blasting Vibration

Numerical analysis on dynamic response and damage threshold characterization of deep rock mass under blasting excavation

Study on the Effect of Blasting Vibration on Rock Bolt and Shotcrete

Analysis of blasting vibration signal of high steep anti-dip layered rock slope

Blasting profile evaluation of sand-mud interbedded surrounding rock during the large-span tunnel construction

Modeling Study on Cumulative Damage Effects and Safety Control Criterion of Open-Pit Final Slope Under Blasting

Numerical and Field Measurement Investigation on Foundation Pit Excavation Blasting of Anchor in Suspension Bridge

Numerical Analysis for Dynamic Response of In Situ Blasting Expansion of Large Cross-Section Tunnel with Small Net Distance

Numerical Simulation of Construction Blasting of Stratified Surrounding Rock in Inclined Shaft in Highland Stress Area

Optimal Design of Presplit Blasting Network of Deep Concave Open-Pit Mine Slope with Heterogeneous Complex Rock Mass

Research and Analysis on the Influence of Small Clear Distance Drilling and Blasting Method on the Existing Tunnel Structure

Study on the Weakening Law and Classification of Rock Mass Damage under Blasting Conditions

Stability Analysis of Rainfall-Triggered Toe-Cut Slopes and Effectiveness Evaluation of Pile-Anchor Structures

Research on Surrounding Rock Stability Affected by Surrounding Rock Pressure and Rock Fracture under Blasting Vibration Load Action