Abstract:Investigating the evolution of the fire plume centerline temperature has both fundamental and practical importance to process safety, risk analysis and disaster control. In practice, ullage height (distance between the fuel surface and the container upper rim) is a common boundary condition that affects the burning intensity and the flaming characteristics. In this study, a series of experiments were conducted to reveal the effects of ullage height on the evolution of the heptane fire plume centerline temperature. The tested ullage height was systematically changed from zero to the value at which the flame self-extinguished. Results showed that, as ullage height increased, the fire plume centerline temperature first decreased and then slightly increased. By comparing the model predictions of previous classic models with the tested results, this study proved that previous classic models are not capable in predicting temperature profiles under high ullage height conditions. Based on physical and dimensionless analysis, a new virtual origin model was established to quantify the effects of ullage height on the virtual origin. A more universal plume centerline temperature model, which is capable to predict the centerline temperature profiles with any ullage height conditions, was proposed and validated by literature experimental data.

Confirmation of BLEVE Fireball Mass in QRA

Fireball Heat Radiation of LPG BLEVE Risk Assessment

Hazard analysis on LPG fireball of road tanker BLEVE based on CFD simulation

Ablation Analysis and Engineering Calculation on Carbon-based Material of Reentry Vehicles

Modification of co-volume parameter b in mixing rule for calculating vapor liquid equilibrium

Study on the Flammability Limits of Lithium-Ion Battery Vent Gas under Different Initial Conditions

Fireball modeling and thermal hazards analysis of leaked 1,1-difluoroethane in fluorine chemical industry based on FDS

Influence of Thermal Stratification by Fire on Heat-Mass Coupling Response Mechanism of the Liquefied Tank

In-depth Analysis of Burning Process of Binary Blended Fuel Pool Fires Based on Liquid–vapor Equilibria

A Novel Method Based on Information Fusion for Modeling Burden Surface Temperature Field in Blast Furnace

A novel extraction method of burden surface temperature field center in blast furnace

Monte-Carlo Analysis of the Flight of Missiles from LPG Tank Explosion

Method for Quantitative Risk Assessment of Tank Accidents Triggered by Lightning

Development of efficient methods for prediction of medium to large scale BLEVE pressure in open space

Experimental Study of the Effects of Ullage Height on Fire Plume Centerline Temperature with a New Virtual Origin Model

Study on Ignition Probability of Flammable Materials after Leakage Accidents

Dissecting the Energy Budget of a Gamma-Ray Burst Fireball

Analysis Of Fire-Induced Failure Of Lpg Tanks

Methods of Measuring the Heat transfer Parameters of Liquid Propellant Explosion Fire Balls

THEORETICAL STUDY ON THERMAL PROCESSES PROPERTIES IN LIQUID PROPELLANT ROCKET EXPLOSION

Quantitative Risk Assessment of Continuous Liquid Spill Fires Based on Spread and Burning Behaviours