Abstract:Purpose: Computational fluid dynamics (CFD) and 4D-flow magnetic resonance imaging (MRI) are synergically used for the simulation and the analysis of the flow in a patient-specific geometry of a healthy thoracic aorta. Methods: CFD simulations are carried out through the open-source code SimVascular. The MRI data are used, first, to provide patient-specific boundary conditions. In particular, the experimentally acquired flow rate waveform is imposed at the inlet, while at the outlets the RCR parameters of the Windkessel model are tuned in order to match the experimentally measured fractions of flow rate exiting each domain outlet during an entire cardiac cycle. Then, the MRI data are used to validate the results of the hemodynamic simulations. As expected, with a rigid-wall model the computed flow rate waveforms at the outlets do not show the time lag respect to the inlet waveform conversely found in MRI data. We therefore evaluate the effect of wall compliance by using a linear elastic model with homogeneous and isotropic properties and changing the value of the Young's modulus. A stochastic analysis based on the polynomial chaos approach is adopted, which allows continuous response surfaces to be obtained in the parameter space starting from a few deterministic simulations. Results: The flow rate waveform can be accurately reproduced by the compliant simulations in the ascending aorta; on the other hand, in the aortic arch and in the descending aorta, the experimental time delay can be matched with low values of the Young's modulus, close to the average value estimated from experiments. However, by decreasing the Young's modulus the underestimation of the peak flow rate becomes more significant. As for the velocity maps, we found a generally good qualitative agreement of simulations with MRI data. The main difference is that the simulations overestimate the extent of reverse flow regions or predict reverse flow when it is absent in the experimental data. Finally, a significant sensitivity to wall compliance of instantaneous shear stresses during large part of the cardiac cycle period is observed; the variability of the time-averaged wall shear stresses remains however very low. Conclusions: In summary, a successful integration of hemodynamic simulations and of MRI data for a patient-specific simulation has been shown. The wall compliance seems to have a significant impact on the numerical predictions; a larger wall elasticity generally improves the agreement with experimental data.

Multiscale Study on Hemodynamics in Patient-Specific Thoracic Aortic Coarctation.

Study on hemodynamics in patient-specific thoracic aortic coarctation model

Numerical Simulation of Human Thoracic Aorta Based on CT Images

Modeling of coarctation of aorta in human fetuses using 3D/4D fetal echocardiography and computational fluid dynamics.

Numerical Simulation in the Abdominal Aorta and the Visceral Arteries with or Without Stenosis Based on 2D PCMRI

Computational Fluid Dynamics in the Numerical Simulation Analysis of End-to-side Anastomosis for Coarctation of the Aorta

Three-dimensional hemodynamics analysis of the circle of Willis in the patient-specific nonintegral arterial structures

Experiments and Simulations to Assess Exercise-Induced Pressure Drop Across Aortic Coarctations

Numerical simulation of two-phase non-Newtonian blood flow with fluid-structure interaction in aortic dissection

A fast approach to estimating Windkessel model parameters for patient-specific multi-scale CFD simulations of aortic flow

A new method for scaling inlet flow waveform in hemodynamic analysis of aortic dissection

Study of Effect of Boundary Conditions on Patient-Specific Aortic Hemodynamics

Validation of Numerical Simulations of Thoracic Aorta Hemodynamics: Comparison with In Vivo Measurements and Stochastic Sensitivity Analysis

Three-dimensional Simulation of Blood Flow in Human Thoracic Aorta

Computational numerical analysis of different cannulation methods during cardiopulmonary bypass of type A aortic dissection model based on computational fluid dynamics

In silico modeling for personalized stenting in aortic coarctation

Deep learning based assessment of hemodynamics in the coarctation of the aorta: comparison of bidirectional recurrent and convolutional neural networks

Sensitivity of Flow Patterns in Aneurysms on the Anterior Communicating Artery to Anatomic Variations of the Cerebral Arterial Network.

A geometric multiscale model for the numerical simulation of blood flow in the human left heart

A computational study of aortic reconstruction in single ventricle patients

Construction and Analysis of Human Thoracic Aorta Based on CT Images