Abstract:The trochoidal milling mode is widely used in high-speed machining, and due to good adaptability and flexible posture adjustment, ball-end milling cutters are conducive to complex surface machining with this mode. However, the processes of material removal and formation of machined micro surfaces are very difficult to describe as the profile of cutter teeth is complex and the trajectory direction changes continuously during the trochoidal milling process. A modeling method for the generation of micro surface topography of ball-end milling in the trochoidal milling mode is put forward. In this method, the locus equation of each cutter tooth is established based on the principle of homogeneous coordinate transformation, after which a Z-MAP algorithm is designed to simulate the micro surface topography. The Z-MAP algorithm can quickly obtain the part grid nodes potentially swept by the cutter tooth within a unit time step through the establishment of servo rectangular encirclement and instantaneous sweeping quadrilateral of the element of cutter teeth; the part grid nodes actually swept are further determined through an angle summation method, and the height coordinate is calculated with the method of linear interpolation according to Taylor’s formula of multivariate functions. Experiments showed that the micro surface topography resulting from ball-end milling in the trochoidal milling mode had high consistency with the simulation, which indicates that the proposed method can predict micro surface topography in practical manufacturing. In addition, a comparison of micro surface topography between trochoidal milling and ordinary straight-linear milling was conducted, and the results showed that the former was overall superior to the latter in resulting characteristics. Based on this conclusion, the influences of cutting parameters of ball-end trochoidal milling on surface characteristics, particularly amplitude and function, were analyzed according to the simulated micro surface topography data.

Analytical Modeling of Cutter Engagement Regions in Ball-end Milling of Curved Surface

Analysis of milling forces in slot milling of aluminum alloy with three flutes cutter

Modeling Cutter Engagement Region for Triangular Mesh

An Investigation of Cutting Forces in Horizontal-Mode Peripheral Milling of Curved Surfaces

Analysis of 3D Curve Expansion of Conical Cam with Oscillating Tapered Roller Follower

Analytical Model to Predict Milling Forces for Arc Curved Surfaces

An accurate mathematical model for ball end mills with chisel edge

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Modelling and Optimization of Machined Surface Topography in Ball-End Milling Process

The Cutter Envelope Surface Calculation of Multi-Axis NC Machining

Enhanced modeling of instantaneous uncut chip thickness and cutter workpiece engagement region in 5 axis ball end milling: Case of the tilt orientation

Prediction of Cutter-Workpiece Engagement for Five-Axis Ball-End Milling

Analysis of End Milling Surface Error Considering Tool Compliance

Cutting dynamics research on the five-axis machining of thin curved surface with barrel-taper-ball milling cutter

ANALYTICAL MODEL FOR END MILLING SURFACE GEOMEIRICAL ERROR WITH CONSIDERING

Design of a CAM System for End Mills Based on Solid Modeling

Modeling and Analysis of Micro Surface Topography from Ball-End Milling in a Trochoidal Milling Mode

Extraction of geometric boundary parameters in the simulation of ball-end milling operations

A Cutting Force Model for a Waved-Edge End Milling Cutter

Modeling and simulation of surface topography in five-axis ball end milling