Abstract:This work investigated the bubble size variation under various aqueous conditions, including saline and surfactant solutions, with different gas injection rates using a commercial bubble analyzer. The results show that salt and surfactant can minimize bubble size with increasing solute concentration, and the surfactant outperforms salt. In addition, the critical coalescence concentrations (CCC) of salt and surfactant could be determined at 20 g/l and 20 mg/l, respectively, over which bubble mean size cannot be further reduced. On the other hand, the gas injection rate, compared to the solute concentration, has minor effects on bubble size variation. Nonetheless, there is a critical coalescence injection rate (CCIR) of 30 ml/min for surfactant solution, over which the standard deviation of the bubble size distribution (BSD) cannot be further increased. In principle, this work improves the accuracy and efficiency of the bubble analyzer. It also presents a sound understanding of two influential factors rather than a single-factor controlling bubble size. Most importantly, it is the first time to observe and propose the concept of CCIR to describe how the gas injection rate influences the standard deviation of BSD. Based on those results and findings, it is able to conclude that bubble size control, whose mechanism has been previously identified as the bubble collision and coalescence rather than the surface tension of water solutions, is actually dominated by not only the solute concentration but also the gas injection rate when a porous air sparger is used to generate bubbles. It is expected that this work could contribute to laboratory modeling bubbly flow in a porous medium in order to bring more insights into the mechanism of soil gas leaking through soil strata.

EXPERIMENTAL STUDY OF OXYGEN BUBBLE ABSORPTION IN SULFITE SOLUTION

Modeling and Experimental Study of Oxygen Absorption in Sulfite Solution with Fine Particles

Study On A Photographic Method Used In Measurement Of The Reaction Rate Of Sulfite Oxidation

Modelling Study of Sulfite Oxidation Gas-Liquid Reaction

A Photographic Method for the Measurement of Reaction Rate of Sulfite Oxidation

Experimental and numerical investigation of reactive species transport around a small rising bubble

Study on Fine Particles Influence on Sodium Sulfite and Oxygen Gas-Liquid Reaction

Dissolution Process of CO2 Bubble Adhered to a Flat Plate in a Flow Fluid

Mass Transfer and Reaction Kinetics of Sulfuryl Fluoride Absorption with Aqueous Sodium Hydroxide Solutions

Evaluating Dissolved Ozone in a Bubble Column Using a Discrete-Bubble Model

Wettability-dependent dissolution dynamics of oxygen bubbles on Ti64 substrates

Study on the Reaction Rate of Sulfite Oxidation with Cobalt Ion Catalyst

The Research on SO2 Stability in Gas Absorption Cell

The Study of Calcium Sulfate Decomposition by Experiments Under O2/CO2 Atmosphere

Applying Imaging Technique to Investigate Effects of Solute Concentrations and Gas Injection Rates on Gas Bubble Generation

Modeling on bubble effectiveness in gas-liquid reactor (2) Experimental study on single bubble effectiveness and its applications

Self-Accelerating Interfacial Catalytic Elimination of Gaseous Sulfur-Containing Volatile Organic Compounds as Microbubbles in a Facet-Engineered Three-Dimensional BiOCl Sponge Fenton-Like Process

Experimental study and analysis of CO2 and SO2 absorption in various water-based nanofluids by response surface methodology

Effect of nanoparticles on oxygen absorption enhancement during sulfite forced oxidation

REACTION RATE OF SULFITE OXIDATION WITHOUT CATALYST

Experimental study on single CO 2 bubbles freely rising in MEA/DEEA blended solutions: Bubble behavior and mass transfer