Peak-to-Average Power Ratio Reduction Scheme in DCO-OFDM with a Combined Index Modulation and Convex Optimization
Menglong WU,Jianwen ZHANG,Yongfa XIE,Yongchao SHI,Tianao YAO
DOI: https://doi.org/10.1587/transfun.2023eal2113
2024-01-01
Abstract:Direct-current biased optical orthogonal frequency division multiplexing (DCO-OFDM) exhibits a high peak-to-average power ratio (PAPR), which leads to nonlinear distortion in the system. In response to the above, the study proposes a scheme that combines direct-current biased optical orthogonal frequency division multiplexing with index modulation (DCO-OFDM-IM) and convex optimization algorithms. The proposed scheme utilizes partially activated subcarriers of the system to transmit constellation modulated symbol information, and transmits additional symbol information of the system through the combination of activated carrier index. Additionally, a dither signal is added to the system's idle subcarriers, and the convex optimization algorithm is applied to solve for the optimal values of this dither signal. Therefore, by ensuring the system's peak power remains unchanged, the scheme enhances the system's average transmission power and thus achieves a reduction in the PAPR. Experimental results indicate that at a system's complementary cumulative distribution function (CCDF) of 10-4, the proposed scheme reduces the PAPR by approximately 3.5 dB compared to the conventional DCO-OFDM system. Moreover, at a bit error rate (BER) of 10-3, the proposed scheme can lower the signal-to-noise ratio (SNR) by about 1 dB relative to the traditional DCO-OFDM system. Therefore, the proposed scheme enables a more substantial reduction in PAPR and improvement in BER performance compared to the conventional DCO-OFDM approach.
computer science, information systems,engineering, electrical & electronic, hardware & architecture