Abstract:Dual-beam optical trap is constituted by two beams of unfocused counter-propagating laser. It has advantages such as several equilibrium points, small optical power density, large capture range and easier integration with other technologies, which optical tweezers may not achieve. Dual-beam optical trap stiffness is an important parameter to describe its mechanical properties. On the basis of quartz-substrate dual-beam optical fibre trap unit, we demonstrate a simple method for measuring stiffness. Residual gravity offset by buoyancy may provide a tiny force for the optical trap. By measuring the relations between the captured particle's axial equilibrium position and residual gravity, we may calibrate the optical trap stiffness. This method simply requires measuring the relative position of the particle in the steady state of the optical trap, and dynamic measurement of the particle's location is not needed, so we can get a high position accuracy by long time measuring, thus the accuracy of the stiffness' calibration is improved. In this paper, we simulated and carried out experiments to measure the stiffness of a dual-beam fibre optical trap unit based on a quartz-substrate. We simulate the stiffness of several Mie particles with different materials and sizes in dual-beam optical trap as well as the relation between the waist radius of fundamental mode Gaussian beam and stiffness. Stiffness measurement experiment is conducted using the residual gravity method. Stiffness values measured in experiments are consistent with the simulation results, which verify the validity and accuracy of the method.

Theoretical and experimental investigation of the optical trapping force in single lensed fibre trapping

Experimental measurement and analysis of the optical trapping force acting on a yeast cell with a lensed optical fiber probe

Experimental Measurement of the Trapping Force Acting on a Yeast Cell with a Lensed Optical Fiber Probe

Simulation for the trapping force on Mie micro-particles in optical tweezers

Manipulation of yeast cells by a tapered fiber probe and measurement of optical trapping force

Numerical and Experimental Investigation on the Optical Manipulation from an Axicon Lensed Fiber

Longitudinal Lorentz Force on A Subwavelength-Diameter Optical Fiber

Theoretical Research and Comparison of Forces in Optical Tweezers Based on Ray Optics Method and T Matrix Method

Numerical Analysis of Optical Trapping Force Affected by Lens Misalignments

Optical trapping of two different microparticles by a double-tapered fiber probe

High-Order Fiber Mode Beam Parameter Optimization for Transport and Rotation of Single Cells

Comment on: Computation of the optical trapping force using an FDTD based technique

Manipulation and Arrangement of Biological and Dielectric Particles by a Lensed Fiber Probe.

Influence of slow light effect on trapping force in optical tweezers

Optical Torque Calculations and Measurements for DNA Torsional Studies

0ptical trapping with optical magnetic field and photonic Hall effect forces

Quantifying Trapping Stability of Optical Tweezers with an External Flow

Simulation and Measurement of Stiffness for Dual Beam Laser Trap Using Residual Gravity Method

Optical trapping force on two types of particles with a focused partially coherent Lommel-Gaussian beam

Dynamic Analysis of Trapping and Escaping in Dual Beam Optical Trap

Shape-induced force fields in optical trapping