Abstract:In this paper, the problems of non-slipping contact, non-slipping adhesive contact, and non-slipping adhesive contact with a stretched substrate are sequentially studied under the plane strain theory. The main results are obtained as follows:(i) The explicit solutions for a kind of singular integrals frequently encountered in contact mechanics (and fracture mechanics) are derived, which enables a comprehensive analysis of non-slipping contacts. (ii) The non-slipping contact problems are formulated in terms of the Kolosov-Muskhelishvili complex potential formulae and their exact solutions are obtained in closed or explicit forms. The relative tangential displacement within a non-slipping contact is found in a compact form. (iii) The spatial derivative of this relative displacement will be referred to in this study as the interface mismatch eigenst rain. Taking into account the interface mismatch eigenstrain, a new non-slipping adhesive contact model is proposed and its solution is obtained. It is shown that the pull-off force and the half-width of the non-slipping adhesive contact are smaller than the corresponding solutions of the JKR model (Johnson et al., 1971). The maximum difference can reach 9% for pull-off force and 17% for pull-off width, respectively. In contrast, the new model may be more accurate in modeling the non-slipping adhesion. (iv) The non-slipping adhesions with a stretch strain (S-strain) imposed to one of contact counterparts are re-examined and the analytical solutions are obtained. The accurate analysis shows that under small values of the S-strain both the natural adhesive contact half-width and the pull-off force may be augmented, but for the larger S-strain values they are always reduced. It is also found that Dundurs' parameter beta may exert a considerable effect on the solution of the pull-off problem under the S-strain.These solutions may be used to study contacts at macro-, micro-, and nano-scales. (C) 2012 Elsevier Ltd. All rights reserved.

Contact of Coated Systems under Sliding Conditions

Modeling of fully coupled thermo-elastic sliding contact of coated systems

Numerical Analysis of Elastic Coated Solids in Line Contact

An Efficient Numerical Method for the Solution of Sliding Contact Problems

Fundamental formulation for frictional contact problems of coated systems

Symmetrization of Contact Stresses in Coating under Frictional Sliding Indentation

Complex Variable Formulation for Non-Slipping Plane Strain Contact of Two Elastic Solids in the Presence of Interface Mismatch Eigenstrain

Elastic shakedown analysis of two-dimensional thermo-elastic rolling/sliding contact for a functionally graded coating/substrate structure with arbitrarily varying thermo-elastic properties

Numerical Analysis Of Point Contact Ehl On Coated Substrates

Method of analyzing coating structure under conical concave contact

Numerical Analysis of a Sliding frictional contact problem with Normal Compliance and Unilateral Contact

Partial Slip Contact Analysis on Three-Dimensional Elastic Layered Half Space

A Semianalytical and Finite-Element Solution to the Unbonded Contact Between a Frictionless Layer and an FGM-coated Half-Plane

Numerical Method for Solving Contact Problems under Partial Slip Conditions

Analysis Of A Contact Problem With Unilateral Constraint And Slip-Dependent Friction

Numerical Analysis of 3D Unilateral Quasi-static Contact: Effect of Coating Thickness and Mechanical Properties

Understanding adhesive sliding nanocontact mechanics in an exponentially graded coating-substrate structure

Analytical Solution for Sliding Rounded-Edge Contact

Interfacial Mechanics Analysis of a Brittle Coating–Ductile Substrate System Involved in Thermoelastic Contact

Three-dimensional tractive rolling contact analysis of functionally graded coating-substrate systems with interfacial imperfection and frictional anisotropy

Impact contact behaviors of elastic coated medium with imperfect interfaces