Abstract:H2/O2 fuel cells and direct methanol fuel cells (DMFC) are one of the most promising efficient and environmental friendly energy generation systems because of their low emissions and high working efficiency, which are extensively applied in stationary power, automobiles and portable electrical source[1-2]. The proton exchange membrane (PEM), the key component of fuel cell, acts as a separator to prevent the mixing of the fuel and the oxidant and severs as an electrolyte to transfer protons from the anode to the cathode [3]. The PEM must be satisfied with following peculiarities such as high proton conductivity, low electronic conductivity, long-term chemical stability, good mechanical strength under fuel cell operation conditions and low cost. In the early 1960s, sulfonated polystyrene copolymers membranes were used as the PEM in proton exchange membrane fuel cells (PEMFCs) [4]. However, short lifetime and relatively high price limited their further applications. In the later 1960s, Nafion® perfluorosulfonated membranes produced by DuPont company have been extensively used because of their high conductivity and chemical stability [5-7]. However, there are some drawbacks, such as high methanol permeability, relatively low proton conductivity at high temperature and high price, which baffle their further developing. Recently many researchers have been devoted to developing new hydrocarbon PEM materials that are of good mechanical performance and thermooxidative stability, low price and high proton conductivity. Nowdays, the developed novel polymer electrolyte membranes include sulfonated poly(arylene ether sulfone)s[8-10], sulfonated poly(arylene ether ketone)s[11-15], sulfonated polyimides[16-19], sulfonated polybenzimidazoles[20-22], block sulfonated copolymers and their composite membranes[23-28], etc. Sulfonated polymers may be prepared either by postsulfonation of the polymers or by polycondensation of sulfonated monomer with other non-sulfonated monomers [29]. The postsulfonation polymers were prepared by electrophilic aromatic sulfonation using concentrated sulfuric acid, fuming sulfuric acid, chlorosulfonic acid or

Recent Progress in the Development of Sulfonated Hydrocarbon Polymers for Fuel Cell Application(Ⅱ)

Study on Control of Polymeric Architecture of Sulfonated Hydrocarbon-Based Polymers for High-Performance Polymer Electrolyte Membranes in Fuel Cell Applications

Recent progress in hydrocarbon polymer membranes for fuel cell

Highly Proton-Conductive Sulfonated Aromatic Polymers for Medium-Temperature Proton Exchange Membrane Fuel Cells

Membranes from sulfonated block copolymer for use in proton exchange membrane fuel cells

High flexible ether-free semi-crystalline fuel cell membranes: Molecular-level design, assembly structure and properties

Developments of Highly Proton-Conductive Sulfonated Polymers for Proton Exchange Membrane Fuel Cells

Polymer Composites for High-Temperature Proton-Exchange Membrane Fuel Cells

Influence of structure construction on water uptake, swelling, and oxidation stability of proton exchange membranes

Tuned polymer electrolyte membranes based on aromatic polyethers for fuel cell applications

Investigation on Structure and Behaviours of Proton Exchange Membrane Materials by TEM

Recent developments in high-performance Nafion membranes for hydrogen fuel cells applications

Synthesis of Sulfonated Poly(Imidoaryl Ether Sulfone) Membranes for Polymer Electrolyte Membrane Fuel Cells

Poly(fluorenyl Aryl Piperidinium) Membranes and Ionomers for Anion Exchange Membrane Fuel Cells

Sulfonated polyimides and their polysilsesquioxane hybrid membranes for fuel cells

Sulfonated poly(arylene-co-imide)s as water stable proton exchange membrane materials for fuel cells

Solid polymer electrolyte membranes for fuel cell applications—a review

Systematic Stability Investigation of Perfluorosulfonic Acid Membranes with Varying Ion Exchange Capacities for Fuel Cell Applications

Sulfonated poly(fluorenyl ether ketone) ionomers containing aliphatic functional segments for fuel cell applications

Molecular engineering of hydrocarbon membrane to substitute perfluorinated sulfonic acid membrane for proton exchange membrane fuel cell operation

DIRECT SYNTHESIS AND PROPRTIES OF SULFONATED POLY(ARYLENE ETHER SULFONE) COPOLYMERS FOR PROTON EXCHANGE MEMBRANES IN FUELCELLS